SD v2.2 interface

Champion (324)

19-05-2009, 14:20

I am allmost ready to have a small lot of 10 PCBs produced for a V2.2 SD interface originally designed by sharksym. There will be 2 SD slots present.
The PCB should fit in a konami size cartridge casing and this casing will not be included.
Total costs for this all will be around €42,50 excl shipping costs for a complete working PCB.
Final costs will be determined after receipt of the first lot of PCBs and getting the first one working
Anyone interested in this device can either respond on this topic or send me an email (evanson (a) quicknet nl)
Be aware that it will take some time for me to get all the stuff and any updates will be posted in this thread.

By dhau

Paragon (1496)

19-05-2009, 15:04

Wait, wait, so the PCB will have a SCC chip? Or is it replaces SCC with compatible mapper?

By Google

By Erikie

Champion (324)

19-05-2009, 15:05

There will be no SCC chip on this PCB. Mapper logic is built in the CPLD as well as the SD logic.
Also there is no SCC music implementation present. Only SD / MMC logic.

By cax

Scribe (3641)

19-05-2009, 16:31

That's the beauty of this SD/MMC card reader - you don't need to find SCC cartridge and break it, and it's cheap.
sinfox's version of SD/MMC drive with SCC chip will cost you 2 times more, and the closest similar device - CF ATA-IDE - costs more than 60 euro.

By muffie

Paladin (933)

19-05-2009, 17:13

Can I use the SD/MMC with a SCC cart on the second slot? Or would I need to adapt the .ROMS to look for the SCC on a different slot?

By dhau

Paragon (1496)

19-05-2009, 17:45

Erikie, please post some photos if possible! Also, do you think it's possible to add soldering space for optional alpha-numeric 16x2 LCD (example) in future versions? That would be kick-buttocks :)

By Erikie

Champion (324)

19-05-2009, 18:38

this version works in any primary slot and I am still looking into modifying roms / support programs to support expanded slots too
I have no images yet but can make an image of my prototype if you would like to see that?

By Huey

Prophet (2132)

19-05-2009, 20:58

I want one! Count me in.

Another good reason to choose this SD/MMC reader is the fact that it runs on MSX1 too.

By muffie

Paladin (933)

19-05-2009, 21:31

version 2.2 is the fast one right?
I want one too. It came with plastic casing?

By Erikie

Champion (324)

19-05-2009, 21:37

casing is not included, however I might have one lying around. But you have to drill holes etc yourself then
I hope to start the order for PCBs this week or early next week

By muffie

Paladin (933)

19-05-2009, 22:14

I want a flashing blue LED on mine!
I can handle the holes!!!

Don't you have an account yet? Become an MSX-friend and register an account!