I'm trying different hardware with the OCM, and I'm having problems.
Someone test obsonet or moonsound in OCM?
With the obsonet, DOS2 do not load with the bios1.1, and with bios1.0 do not load INL ( "no memory" message )
And the moondsound software do not find the hardware.

thanks.

Just for help, you should tell us which firmware are you using. I saw Moonsound working (I don't have this at home atm and I can't test right now), so check your OCM configuration. Does it happen in both slots?

OCM comes with DOS2 + FAT16 by default. The problem with INL could be derived from loading the FAT16 driver? I don't really know as I don't have my Obsonet anymore.

Well, my obsonet use the "normal" firmware and the DOS2+fat16 that come with it, i do not have any modification.

DIP:
12345678
11011000
(disk.rom on, 3,58Mhz, primary slot 2 normal.)

When I use mem command:
slot:3-0 memory:1024 reserved:1024 free:0 (¿?)
TPA size: 53K

XDDD

For Makinavaja the Obsonet works perfect. In 10Mhz mode too.

For me the obsonet only works in 3,5 Mhz and only in some order or with some cartidges, but this obsonet is a little especial, i repaired it.

I think Saeba says the OCM firmware.

Well, one problem solved
Memory errors on load the software of INL and the moondound was a line in the autoexec.bat that appear in the CD of OCM: "ramdisk 4064", that reserve ALL memory , I deleted this option, and work well
Other problem, is, that obsonet do not work me with 1.1 bios

PD: in the other post "my obsonet use the "normal" firmware" is incorrect, is:
"my OCM use the "normal" firmware"

Quote:

I'm trying different hardware with the OCM, and I'm having problems. Someone test obsonet or moonsound in OCM? With the obsonet, DOS2 do not load with the bios1.1, and with bios1.0 do not load INL ( "no memory" message ) And the moondsound software do not find the hardware. thanks.

I have the same problem with Moonsoud v1. I know there is persons which Moonsound v2 without problems.

Yes, I can confirm that the MoonSound v2 works with the 1chipMSX.