Author
| Symbian emulator?
|
jr
msx addict
Posts: 310 |  Posted: January 18 2005, 13:13 |
I have now implemented the support for the block size and block start parameters in the HBI-V1 except for the 1/3, 2/3 and 3/4 sizes -- I was wondering if anyone knows what the actual pixel sizes and positions for the images are when using these modes. This is because 256/3 == 85 1/3, which means you will either have two 85 pixel wide and one 86 pixel wide image, or three 85 pixel wide images and one pixel column is left unused...? And the same problem applies to image height (212/3 == 70 2/3).
Also, since the internal software always clears the whole screen, I was wondering if using mode 3 (clear memory) with block size & start parameters actually clears only the specified area?
|
|
jr
msx addict
Posts: 310 | Posted: January 19 2005, 08:55 |
D-Tail, do you mean that when the HBI-V1 digitizing process is started, I would actually show a "normal" RGB camera preview on the screen until you press a key and only after that the emulated HBI-V1 would get the digitized image? It would certainly make it easier to "target" the image you want to digitize.
|
|
snout
msx legend
Posts: 4992 | Posted: February 16 2005, 01:20 |
Sousuke, the ROMpackager on your website seems to be corrupt. Could you replace it with a working archive? Thanks!  |
|
Sousuke
online
msx freak
Posts: 154 | Posted: February 16 2005, 16:21 |
Wow didn't notice that the file was damaged! Must 've got corrupted during a (recent?) backup...
Thanks snout! |
|
snout
msx legend
Posts: 4992 | Posted: February 16 2005, 16:43 |
thank you! |
|
Latok
msx master
Posts: 1734 | Posted: May 02 2005, 23:07 |
Today, I bought a Nokia 6630 and of course, I tried installing fMSX s60.....No problem at all! BUT.....NO SOUND!! JR, what's the problem with the Nokia 6630? Other Symbian OS version which causes the sound problem or something?
|
|
jr
msx addict
Posts: 310 | Posted: May 03 2005, 08:02 |
No sound? I've been running the emulator on my 6630 for half a year now and getting sound out hasn't been an issue. There are some other problems though. Does the emulator still run if you have sound enabled? Did you check the sound settings? If you have "obey silent mode" turned on, your active system profile needs to have "Warning Tones" turned on as well.
|
|
[D-Tail]
msx guru
Posts: 3020 | Posted: May 05 2005, 00:36 |
Isn't that so for every Symbian phone? My 6260 has that as well... Check your manual carefully 
And btw, nice work, that 6630, I didn't have the patience to wait for it at the time... |
|
jr
msx addict
Posts: 310 | Posted: May 05 2005, 07:55 |
Yep, it applies to any Series 60 phone. The "obey silent mode" option in the emulator is only available in the b version, the a version works as if that setting was off.
|
|
Latok
msx master
Posts: 1734 | Posted: May 05 2005, 10:37 |
JR, mea culpa, I was way too quick, that sad truth is......I didn't had sound turned on at all 
How low can you go......sigh........ |
|
jr
msx addict
Posts: 310 | Posted: May 05 2005, 19:21 |
phew... good, now I can concentrate on beer drinking again |
|
wiebe
msx novice
Posts: 32 | Posted: May 06 2005, 03:40 |
I'm just catching up this thread, but just to make sure:
* you buy a Nokia,
* install an MSX emulator,
* and play Metal Gear on it?
aaaaaaaaaaaaaaaaaaaaaaaaaargh. now please explain to me why my code should be efficient??? All the stuff I'm writing now can be emulated in 20 years time on a watch, why should I care about clock cycles or LOG(n) operations?
If Apollo 13 would have been built by Nokia...
|
|
Haakie
msx friend
Posts: 6 | Posted: May 23 2005, 18:50 |
Ok, I own a Nokia 6260 (congrats, thanks) and managed to install fMSX on to the bloody thing. Downloaded rompackager and made a .SIS package. But when i try to install that package i gives me an error that the package is for a different version! AAAAAAAAAAAAARGH. Could anyone help me out on this???:S
|
|
Sousuke
online
msx freak
Posts: 154 | Posted: May 23 2005, 19:07 |
Have you configured the ROMPackager correctly?
Before creating the SIS-Package, go to the package config: Menu -> Package -> Configure
Then a new dialog opens, change the version number in Package ID and in Package Dependency to 1, 7, 0.
Or change the default settings of the packages under: Menu -> Package -> Defaults
So you only have to change it once |
|
Haakie
msx friend
Posts: 6 | Posted: May 24 2005, 13:03 |
Ok, gettin' pretty aggravated over here. I changed the settings but still no dice. I'm using Rompackager v1.03 and Fmsx 1.07b. It keeps on telling me that the package is suitable for FMSX060 version 0.98.
 |
|
|
|
|
