One Chip MSX MKII

The wait is over. Today, Japan based company D4 Enterprise have opened a website dedicated to the release of a brand new MSX computer, the long awaited One Chip MSX.

Almost one year ago, we reported about the One Chip MSX computer not being produced by ASCII because the limit of 5000 pre orders wasn't met. Back then, Gigamix already told us not to lose hope though, MSX Association immediately went investigating alternatives for a One Chip MSX release after all. Although we already reported about a potential second chance for the One Chip MSX in October 2005, it looks like now they have succeeded. Today, the One Chip MSX was demonstrated on the 70th Comic Market in Tokyo, while tomorrow it will be demonstrated during the Micro Magazine Game Live event. Simultaneously, D4 Enterprise, the company behind Amusement Center (Project EGG/EGG Plus!) unveiled this website, revealing the new specifications and the new transparent-blue casing of the One Chip MSX.

In the past there have been many discussions about the One Chip MSX. People disagreed with the initial configuration and it was rumoured this was the main reason why the 5000 pre orders weren't placed. It looks like they learned from the past and listened to the international MSX scene. The new OCM looks very promising. Here are a few highlights:

MSX2 with 256kB RAM
Kanji support
MSX-DOS2 support
PS/2 connection
2 MSX joystick ports
2 MSX cartridge slots
SD/MMC flashcard slot with native FAT16 support in MSX-DOS2
Composite and SVHS TV output
VGA monitor output
2 cinch audio outputs
FPGA I/O pin (40 pins and 10 pins)
2 USB ports
32MB SDRAM

The FPGA chip used to make it all work is an Altera Cyclone EP1C12Q240C8, while an Altera EPCS4 configuration ROM allows you to restore the default configuration of the One Chip MSX at any point in time.

MSX-MUSIC and SCC+ are supported, while a little investigation on our side revealed both the cartridge ports also have the proper 12V needed to make e.g. a Moonsound work. In this forum thread, a MegaROM loader tool for the One Chip MSX, which allows you to play any MSX game ROM straight from your SD/MMC cards was announced as well. The One Chip MSX website furthermore mentions possibilities of more advanced stereo audio support in the future. Theoretically, the audio cinch connectors could also be used as inputs, e.g. to connect a cassette recorder to. Very importantly, the OCM will be sold together with extensive manuals and software (including VHDL examples) for development purposes.

This all just looks too good to be true. At the moment, we don't know whether the OCM will be sold through D4 Enterprise only and whether it will be available overseas as well. It is likely though that, just like last time, Bazix is to distribute the One Chip MSX with localized manual and 220V adapter outside Japan. At the moment, pre-ordering is not yet possible in or outside Japan, but at the website of D4E you can leave your e-mail address in order to keep informed. Of course, we will keep you informed as soon as possible as well. Until then, stop reading this newspost and get your browser pointing to the new MSX!

Relevant link: MSX website at D4 Enterprise

التعليقات (149)

بواسطة ARTRAG

Enlighted (6845)

11-08-2006, 22:56

INCREDIBLE!!

بواسطة Sonic_aka_T

Enlighted (4130)

11-08-2006, 23:07

Yay? \o/

بواسطة [D-Tail]

Ascended (8259)

11-08-2006, 23:09

HELL YEAH!!!

*and now some more naked chicks!

بواسطة dvik

Prophet (2200)

11-08-2006, 23:09

Wow, that's amazing Impressive features and it looks good too.

بواسطة [D-Tail]

Ascended (8259)

11-08-2006, 23:13

EAT THAT, APPLE!

In your face

بواسطة wolf_

Ambassador_ (9971)

11-08-2006, 23:17

now, the cherry on the cream would be to name it 'mPod' ^_^

بواسطة chaos

Paladin (809)

11-08-2006, 23:26

Finally some great news from Japan again!

بواسطة selios2000

Hero (526)

11-08-2006, 23:44

please change that blue case!!

بواسطة Huey

Prophet (2687)

11-08-2006, 23:48

Hmmmmmmm. I might even consider buying one.
If I hook it up with my portable dvd player I can MSX everywhere

بواسطة mars2000you

Enlighted (6254)

11-08-2006, 23:49

I like this blue case ... as I like the blue MSX screen ... and blueMSX !

بواسطة J-War

Champion (413)

12-08-2006, 00:05

Seriously, i always though believing it could happen was totaly insane... Possibly some kind of joke !
Somehow, I'd like to apologize for that ! I was wrong and i am happy i was...
I am totaly amazed to see the achievement made for the one chip MSX project. Even the casing is modern and smart.

Congratulations to every involved people who made it possible. Thanks.

That said, may i marry Wolf_ ?
RNFF yours.
~J-War

بواسطة J-War

Champion (413)

12-08-2006, 00:18

Just one question tho, will the ocm contain SPYWARE ?

بواسطة wolf_

Ambassador_ (9971)

12-08-2006, 00:22

only in the VHDL-code for the casport ^_^

بواسطة Sonic_aka_T

Enlighted (4130)

12-08-2006, 00:31

I've heard this thing uses WiFi to send identifyable usage stats to Bazix... It's all quite scary, really!!!

بواسطة opcode

Expert (110)

12-08-2006, 01:08

Just curious...
They say PS/2 connection, but in fact I am seeing two USB ports... Maybe the specs are wrong?
Anyway, wonderful news!

Eduardo

بواسطة jltursan

Prophet (2619)

12-08-2006, 01:11

Too good to be true, it's really, really, really official?

بواسطة snout

Ascended (15187)

12-08-2006, 01:42

you better believe it, jltursan! ^_^

بواسطة Chardson

Champion (411)

12-08-2006, 02:07

Wow! Impressive! Actually, this is the first time I feel like buying it! Reading MegaROMs from SD is just too good to be true

بواسطة meits

Scribe (6509)

12-08-2006, 02:18

If this thing is going to be available and the price is nice... I'm thinking of getting one...
at least this story is not as vague as the ascii one... i like that...

بواسطة Maggoo

Paragon (1216)

12-08-2006, 02:24

Way cool ! Get me two of those :-)

بواسطة poke-1,170

Paragon (1769)

12-08-2006, 02:35

www.dropshots.com/photos/152250/20060811/033920.jpg

congratz to all involved for the hard work !

بواسطة dvik

Prophet (2200)

12-08-2006, 03:00

What is the device called, blueMSX ?

بواسطة flyguille

Prophet (3028)

12-08-2006, 04:27

I wonders why when i saw the bluebox, i tought... ehh it is a famicon!!!

today is a very happy day....

بواسطة poke-1,170

Paragon (1769)

12-08-2006, 05:12

more like a zip drive then a famicom

بواسطة ricbit

Champion (438)

12-08-2006, 05:29

Bring this thing to Brazil and I'll buy it.

بواسطة poke-1,170

Paragon (1769)

12-08-2006, 05:49

guess it can be sent worldwide ?

بواسطة poke-1,170

Paragon (1769)

12-08-2006, 05:52

www.dropshots.com/photos/152250/20060812/055023.jpg

Guess I figured out what that C stands for in OCM

بواسطة Konamito

Paragon (1038)

12-08-2006, 07:34

Wondeful news from Japan. Too good to be true but I believe I'll have one of them in my hands sooner or later.

Write down today's date, because it's a new milestone in MSX history...

بواسطة quickzand

Supporter (4)

12-08-2006, 08:05

So when can I order one

بواسطة Matej

Expert (68)

12-08-2006, 09:31

Nice work.Case is perfect.

بواسطة dumfrog

Resident (45)

12-08-2006, 09:36

Uninteresting, they should have done it MSX2+ ! (joke inside )

بواسطة konamiman

Paragon (1173)

12-08-2006, 09:46

Native FAT16 support in DOS 2??
I WANT THIS ROM RIGHT NOW!!!

بواسطة Huey

Prophet (2687)

12-08-2006, 10:15

I translated the site a bit:

'* As a study teaching aid

If the source program which existing MSX language (such as BAISC) although of course thing, the MSX very thing is reproduced, was used, is described with VHDL type is rewritten, the function of MSX are open-ended by your own hand. You you thought, it is possible also to make “original MSX standard”. Also it is funny to try thinking of “MSX3” of dream with everyone, probably will be.'

Does it have some kind of opensource approach?

بواسطة mars2000you

Enlighted (6254)

12-08-2006, 10:21

Excite translation is better :

- As a learning material

If the source program described by the VHDL form used to reproduce MSX not to mention an existing MSX language (BAISC etc.) is rewritten, the function of MSX is extensible in my hand. "Original MSX standard" that you thought about can be made. It might be also interesting that everyone thinks about dream "MSX3".

See complete Excite translation in this forum thread

بواسطة mars2000you

Enlighted (6254)

12-08-2006, 10:24

Comment : everybody can start to think about a new (personal) version of MSX-BASIC, so you can add instructions and create your own MSX 3 !!!

بواسطة mars2000you

Enlighted (6254)

12-08-2006, 10:31

Of course, MSX-BASIC (5.0 ?) is only an example of new (personal) development !

بواسطة yakumo

Expert (75)

12-08-2006, 10:36

Somebody can trhow any light about the aproximate price?

How much will we have to wait for a MSX Portable, or a MSX Lite?

See ya!

بواسطة spl

Paragon (1470)

12-08-2006, 10:44

I want one now!!

بواسطة wolf_

Ambassador_ (9971)

12-08-2006, 10:49

Say uhm.. what if these things are broken (e.g. you dropped it, cola sneaked into it, anything), can they simply be repaired at any fair (@RepairBas for instance)? Or are these devices completely non-suitable for DIY repairs and is it just bad luck then? (e.g. you can as well throw it away)

بواسطة Kosher-X

Supporter (6)

12-08-2006, 11:49

These USB ports, are they 1.1 or 2.0?

Ok, never mind, of course USB 2.0 would be a waste.

Man, that's what I call good news. Fantastic. The price is not cheap but it's fine (19800 yen)

بواسطة sunrise

Paragon (1091)

12-08-2006, 11:50

Repairs, sounds to me is a question of returning to Japan.
Since it is guarantee, or Bazix has to find a repairservice. It is most unlikely that Bas will repair it.
Hans Oranje as well as Sunrise most likely also not

بواسطة wolf_

Ambassador_ (9971)

12-08-2006, 12:09

Thought so already, it's like organs, in the 80's we had our own repairservice because back then they *could* be repaired.. when the digital keyboards came a) they never broke down, and b) we wouldn't be able to fix it anyway. So, let's assume these OCMs won't break down..
(otoh, they ARE computers )

بواسطة snout

Ascended (15187)

12-08-2006, 13:09

The VHDL source code used in the default configuration will be delivered together with the OCM indeed, as a great starting point to start developing that dream MSX3 computer

Considering the price is identical to the previous OCM, the massive improvements (following suggestions from the community) and the neat casing, I think it will be no problem to move from 3500 pre-orders last time to (more than) 5000 orders this time.

As for repairs: you will get a year's guarantee on the OCM, but of course - as in any case - it is void if you do things like spilling coke on it. Schematics of the OCM are most likely available on the CD-ROM as well, so I would not be surprised if someone will - if needed - start a repair service at some point in time.

بواسطة sunrise

Paragon (1091)

12-08-2006, 13:27

Wolf, that has more reasons.
If you want to import those chips it and have it on stock, costs simply a fortune.
And that for something that is still not for sale, besides I think decent asking by Bazix and also allowing it since there is guarantee as said by snout , what is good news also ofcourse.
And to be honest, we have togehter contributed and they listened. So, for me no obstacle to buy anymore

بواسطة sjoerd

Hero (602)

12-08-2006, 14:05

I'd like to have a pink one.

بواسطة mars2000you

Enlighted (6254)

12-08-2006, 14:09

poke will colour it for you

بواسطة ro

Scribe (4707)

12-08-2006, 14:20

good new, but still cucumbers !

But uhrm, does this mean I should throw away my good 'ol MrT?

بواسطة poke-1,170

Paragon (1769)

12-08-2006, 15:19

nah, it'still ain't a turbo r if that's what you mean
so ehhh 189 euros ?

بواسطة Edwin

Paragon (1182)

12-08-2006, 15:38

It may be even cheaper. Last year the 19800 yen came to about 172 euros, at current exchange rate it is 134 euros. Which makes this a damn cheap piece of kit!

بواسطة Edwin

Paragon (1182)

12-08-2006, 15:41

Hmmmm, checking back, last year would have been more like 147. The 172 must have included something else then.

بواسطة Huey

Prophet (2687)

12-08-2006, 15:44

[offtopic]
Wouldn't it be great if it came standard with some MSXdev games?
This way we could reach MSX-ers in other continents (japan!)
[/offtopic]

بواسطة iamweasel2

Paladin (707)

12-08-2006, 15:44

It's good news indeed.
I liked the case, is really nice. And there are improvements, as we asked.

Some questions:

1) Would it be possible to have a english page (or someone translate so we can know more)?
2) What about those USB ports? Can I plug one Pen drive on it and use it as an HD?
3) If the OCM uses 256kb of RAM, all the 32 MB of RAM is free for us or is it being used for something else?
4) What about FAT16 support? How is it done? Is it a improvement in DOS2 (can we use that DOS2 in our MSX machines )?

بواسطة wolf_

Ambassador_ (9971)

12-08-2006, 15:55

1: I think bazix will be that page
3: join the club, various ppl want more RAM by default. (to run for instance Meridian on the day the ocm arrives)

بواسطة ro

Scribe (4707)

12-08-2006, 16:29

@poke, jup I mean a MSX turbo R.

The swapping of letters was a joke, fool!
(remember mr. T? eh)

بواسطة poke-1,170

Paragon (1769)

12-08-2006, 16:51

I'm not gonna fly !!!

بواسطة poke-1,170

Paragon (1769)

12-08-2006, 16:53

and for all mr. t fans : http://youtube.com/watch?v=5H5Yza2XO8k

yes... rap....

about...

yes....

بواسطة dvik

Prophet (2200)

12-08-2006, 18:31

I wonder how good the timing in the OCM is. Would it for example run timing sensitive demos, like Unknown Reality or MSX Unleashed without glitches? And would it be possible to use the OCM as a reference computer when developing new games/demos?

بواسطة ARTRAG

Enlighted (6845)

12-08-2006, 18:49

I had the same doubt, how accurate will be the emulation?
Accurateness and compatibility will be a huge issue in the OCM,
IMHO we will see an MSX compatible, bug free release (comparable with
the level of the current SW emulators)in 1-2 years.

BTW the advantage of an FPGA device is that any new OCM release can be
distributed like it were common SW.

بواسطة dvik

Prophet (2200)

12-08-2006, 18:59

It would be interesting to add the OCM to the emulator comparison.

بواسطة iamweasel2

Paladin (707)

12-08-2006, 18:59

It would be great if we someone could answer all the questions we (still) have. OCM release it's a great news, but it seems that the japanese guys never let us forget that this product is not for us, only to japanese people. This would explain the lack of news in a language (english?) people outside Japan understands...

بواسطة iamweasel2

Paladin (707)

12-08-2006, 19:03

indeed, OCM in the emulator comparision would give us the chance to see how good the current version of OCM really is.

بواسطة Sama

Ambassador (2068)

12-08-2006, 19:45

This is quite an unfounded complaint, imho. Sure, the D4E site is in Japanese, as D4E is to distribute the OCM in Japan. Only a few days later, MRC presents the same news in English. The Japanese don't know any more than the non-Japanese do at the moment. Just wait! Of course many questions rise when a new product is announced, but in most cases you just have to wait for the release and see it for yourself! Probably the service you get with the OCM makes that you know a lot more about the thing before its actual release than you would for many other announced products.

So in short: the Japanese guys do nothing wrong. Nobody does something wrong. As long as not all the details are cleared, just let your imagination work - anticipating is fun too.

بواسطة iamweasel2

Paladin (707)

12-08-2006, 20:02

You just said yourself:
"Sure, the D4E site is in Japanese, as D4E is to distribute the OCM in Japan. Only a few days later, MRC presents the same news in English."

That means, if we didn't have MRC and its contributors that presented the new itself, we would not know about this (at least I wouldn't. I may be speaking for myself, but I don't think its fun to keep checking japanese pages using web translators).

بواسطة wolf_

Ambassador_ (9971)

12-08-2006, 20:09

The Japs usually don't write/talk english, because they can't .., and perhaps they already count with Bazix for their english translations..

بواسطة snout

Ascended (15187)

12-08-2006, 20:23

Indeed... as Bazix take care of the distribution of the OCM outside Japan, it would make little sense for the Japanese distributor to offer an English website. As was the case last year, Bazix will offer several pages with English information on the One Chip MSX. Thanks to the MRC, you all indeed know a lot already, but that doesn't differ from other Japanese products of which information is often available on news/fansites before it's offered on official English websites.

Although questions asked on the MRC are likely to be answered as well, you can always mail Bazix about any questions you might have on the One Chip MSX.

بواسطة iamweasel2

Paladin (707)

12-08-2006, 22:04

Hello Snout, it's nice to talk with you again. Do you have a answer to any of the questions posted here?

بواسطة mars2000you

Enlighted (6254)

12-08-2006, 22:52

>I may be speaking for myself, but I don't think its fun to keep checking japanese pages using web translators).

Well, I like using web translators, not only for Japanese sites, but also Korean or Russian sites. You learn many interesting things, and when it's news, you have them before the 'official' news in English, so I find that amazing.

Now some little tricks :

- for Russian : Babelfish is generally good
- for Japanese : use first Excite, then eventually Babelfish to clarify some things
- for Korean : never try to translate directly to English, the translations are very strange, the trick here is to use Excite to translate first from Korean to Japanese, then from Japanese to English
- general tip : install Firefox and the extension 'Panneau de Traduction' for more comfort

بواسطة sirpaul484

Rookie (23)

13-08-2006, 02:26

Yep.. definitely going to get it..

I am debating, though... Should I keep it the original color, or should I try and paint it black to match my current MSX?

oh well, either way it's nice. I definitely love the specs. Now, if only I can find an MSX compatable gamepad... *sighs*

بواسطة viejo_archivero

Paragon (1395)

13-08-2006, 12:17

I'll keep waiting for the release date before shouting the big "hooray!". After all, we have the same than the last time but adding a nice casing. Anyway, these are definitely good news .

بواسطة wolf_

Ambassador_ (9971)

13-08-2006, 12:45

uhm.. there is *more* than the last time .. (FPGA reset, MSX2, 12v etc.)

بواسطة viejo_archivero

Paragon (1395)

13-08-2006, 12:52

Wolf_, please read my words... yes, now specs are better, but the last time we also had the specs (that is what I meant). I'm not talking about the better the ocm is becoming: I'm talking about the amount of information about the thing. I mean, in the past we knew how it will be, and finally it won't. So, again, for me it is really good news, but I won't start jumping and cryin' involved into a crazy happiness state. I hope you can understand it . You can start rnff if you want .

بواسطة snout

Ascended (15187)

13-08-2006, 13:25

I think with these, all questions that had not been answered yet have been answered by now

Q: What will the price of the OCM be?
A: In Japan, the price has remained unchanged. The goal for Bazix is to release the OCM at the same price (€ 153,- ex VAT) or at a bit lower price (the yen is on our side). Please wait for the official announcements on this one.

Q: When can I order the OCM?
A: In the near future. I can assure you that I'm at least as impatient about this as you are, but we're almost there now.

Q: When will there be an official OCM website in English?
A: Bazix have decided to open such a website as soon as (pre)ordering is possible, and the news goes to press.

Q: Will the OCM be available outside Japan?
A: Yes, Bazix will distribute the OCM outside Japan.

Q: What can the USB ports be used for?
A: By default, the USB ports are not supported. With VHDL, you can use them for virtually anything though. Considering the amount of people who would like to use a pendrive or external HD, I think it will only be a matter of time until someone releases a VHDL upgrade for this functionality.

Q: If the OCM uses 256kB, all the 32MB is free?
A: Part of the 32MB is used for RAM and VRAM. The rest is ready for use.

Q: How is FAT16 support accomplished?
A: Similar to Okei's FAT16 patch, which is already available for 'ordinary' DOS2 MSXes. On the OCM, FAT16 works out-of-the-box though. And did I mention the SD slot is hot-swappable?

Q: The PS/2 connector doesn't show on the pictures. Is it there?
A: It is the intention to have it on the final product. Please wait for the official announcements on this one.

Q: How about accuracy?
A: The MSX2 prototype demonstrated on (e.g.) Bussum 2005 was already quite accurate. Many improvements have been made since. I think testing the OCM in the Emulator Comparison would be a good idea indeed of giving a clear, objective indication on how close the OCM gets to the real thing at this moment. Although I'd like to completely rewrite the Emu Comparison soon, I'll see if it's possible to write a test of the latest prototype with the latest 'firmware' in the nearer future. I'll keep you posted on this.

Q: May J-War marry Wolf_?
A: Only in some countries, lads. But you have my blessing! ^_^

بواسطة wolf_

Ambassador_ (9971)

13-08-2006, 13:29

\o/

بواسطة BiFi

Enlighted (4348)

13-08-2006, 13:35

Q: May J-War marry Wolf_?
A: Only in some countries, lads. But you have my blessing! ^_^
That's really a cucumber FAQ...

(msd wanted me to post this)

بواسطة spl

Paragon (1470)

13-08-2006, 14:33

Thanks for (ALL QUESTIONS of) the FAQ . Hope all release info will be soon available!

بواسطة Guillian

Prophet (3504)

13-08-2006, 15:27

>Q: The PS/2 connector doesn't show on the pictures. Is it there?
>A: It is the intention to have it on the final product. Please wait for the official announcements on this one.

AFAIK, this version includes the PS/2 connector in the back side
Front: USB x2, Joystick x 2, card slot
Back: Power, composite video RCA, audio RCA x 2, PS/2, VGA, SVHS
Upper: Cartridge slot x 2, power switch, reset
Bottom: Config switch

بواسطة Sonic_aka_T

Enlighted (4130)

13-08-2006, 16:18

idd, it looks like there's a connection on the far right (and rear) of the case, think that might be the PS/2 connector.

بواسطة Guillian

Prophet (3504)

13-08-2006, 17:05

>idd, it looks like there's a connection on the far right (and rear) of the case, think that might be the PS/2 connector.
Yes, that is the PS/2 connector, next to the VGA connector. And between the VGA and RCAs is the SVHS one.

بواسطة poke-1,170

Paragon (1769)

13-08-2006, 17:06

hey so ehmm... for the audio side, would it also be technically possible to add effects ?
Like say more operators for fm pac, or on the PSG side, some chorus,delay, flanger stuff ?

بواسطة poke-1,170

Paragon (1769)

13-08-2006, 17:11

as in the step at the end of the chain, before the output. Like routing a synth through an effectpanel

بواسطة wolf_

Ambassador_ (9971)

13-08-2006, 17:13

I'd say it is.. delay is a cookie, really .. chorus/flanger etc. is a bit more tricky as it does require a bit more FP processing. Operator shapes in the Fm-Pac are just a table .. so, <insert your table here>.

بواسطة zett

Hero (608)

13-08-2006, 20:00

ugly box looks cheap!

بواسطة meits

Scribe (6509)

13-08-2006, 20:44

At least there is a case...

بواسطة zett

Hero (608)

13-08-2006, 21:46

yes and thats all.nice a 1chipmsx bad casing. it breaks the fun

بواسطة J-War

Champion (413)

13-08-2006, 22:04

ah ?

بواسطة wolf_

Ambassador_ (9971)

13-08-2006, 22:09

Well, a l33t casing would raise the price of the machine, don't you think? I don't think your suggestions for a nicer case will create a mass following.

بواسطة zett

Hero (608)

13-08-2006, 22:22

I don't think it raise the price. you could make a case of non transparant material and some design in it

بواسطة karloch

Prophet (2157)

13-08-2006, 22:30

Complete MSX2 support? YAW!!!! I just hope that this time we can actually get one of these brand-new MSX

بواسطة Manuel

Ascended (18845)

13-08-2006, 22:48

Great news and great design!

One more question though: what is exactly the type of license agreement that comes with the OCM's VHDL code?
I hope it is GPL like, so that we can all freely share, modify and redistribute the code.

snout?

بواسطة snout

Ascended (15187)

13-08-2006, 23:45

I actually like the transparantness of the case (as you can see it's all really about one chip. no tricks!) and the case itself. Surely, it's only a matter of taste...

About the VHDL license: another 'wait for the official announcements' on that one

بواسطة [D-Tail]

Ascended (8259)

13-08-2006, 23:51

TRANSPARENT M$X BLUE IS WHAT WE ALL WANT! \m/ 1CM for everyone!

بواسطة Nautilus

Expert (76)

14-08-2006, 01:19

Cool! I will certainly buy one.

بواسطة iamweasel2

Paladin (707)

14-08-2006, 01:33

I do think the casing is beautiful (better than the previous design) but I would like to hear about the code license as well.

بواسطة poke-1,170

Paragon (1769)

14-08-2006, 02:33

well hey it does like a zip drive or your average cardreader
So hey, reason the more for some case modding zett ^_^
if my fake mac add wasn't inspiration enough, the phletora
of msx machines is
What about a HB201P mod ? nice

بواسطة Tanni

Hero (556)

14-08-2006, 16:01

Looks very good! I like that transparent blue colour.

بواسطة Pat

Expert (68)

14-08-2006, 17:05

For me: Just skip that PS/2 connection. It's not MSX and a USB keyboards/mouse should not be a problem. Saves a few cent on manufacturing and saves some gates in the FPGA. (Although you can always make a FPGA image without the PS/2 VHDL code.

بواسطة spl

Paragon (1470)

14-08-2006, 17:07

Actually, I like a lot the design and the case

بواسطة Ivan

Ascended (9305)

14-08-2006, 17:25

Yes, simple and robust looking case design. Nice!

بواسطة mars2000you

Enlighted (6254)

14-08-2006, 18:12

Almost 100 reactions !

Who will write the 100th reaction ???

بواسطة Tanni

Hero (556)

14-08-2006, 18:15

بواسطة Tanni

Hero (556)

14-08-2006, 18:17

Seems to be me, mars!

بواسطة msd

Paragon (1472)

14-08-2006, 18:21

Yes because USB is msx and PS/2 isn't .. So what use instead USB keyboards?

بواسطة mars2000you

Enlighted (6254)

14-08-2006, 18:27

Indeed, Tanni, it's you ... but I don't know what you have won ???

بواسطة wolf_

Ambassador_ (9971)

14-08-2006, 19:01

ah, after the casport and the case, we have a new subject of useless debate: the ps2 port ;P

بواسطة sunrise

Paragon (1091)

14-08-2006, 21:04

Keeps people connected to the internet, and or off the street

بواسطة ivke2006

Expert (84)

14-08-2006, 21:35

Yes, I want one for sure but knows someone anything about the performance (CPU + VDP speed) ?
I can imagine that for compatibly reasons the speed is standard set at normal z80 and VDP speed but is there with the current VDHL code some extra performance possible what can be easy 'activated'?

and howmany gates are used for this standaard configuration? Is there still some space left for enhancements?

Snout, could you shine your light on this questions please?

Thx!

بواسطة J-War

Champion (413)

14-08-2006, 22:30

I'd like to celebrate the fact i've never seen sunrise usign a smile, thus 2 in such a short time is simply great ! Thanx to the OCM

بواسطة msd

Paragon (1472)

14-08-2006, 23:03

I've seen the ocm run with vdp delays disabled. The parallax scroll in the sd-snatcher intro was really smooth and fast

بواسطة turbor

Champion (499)

14-08-2006, 23:32

USB and PS/2 keyboards?
Oh great!
Most MSX games uses space+cursors and if you read most emu FAQ's about emulation and keyboard behaviour...

بواسطة Sonic_aka_T

Enlighted (4130)

15-08-2006, 00:06

Yes, Pat, we should get rid of PS/2 connection. It's not MSX! We should use the place for an additional USB connector instead.
And USB should be useable out of the box! I think, the design of the case is appropriate to the product. I like it, too! It looks very nice.Yes, let's get rid of the PS/2 connector which isn't MSX and replace it with the USB connector MSX has had such a long history with! Now there's a good point!! ^_^

بواسطة mars2000you

Enlighted (6254)

15-08-2006, 00:18

Other option : restart the production of separate MSX keyboards (as it was the case for the Pioneer PX-7) and add the connector on the OCM

بواسطة spl

Paragon (1470)

15-08-2006, 00:35

Stupid question: so... you can't use a keyboard without making some coding or is ps/2 activated for keyboard using?

بواسطة Sonic_aka_T

Enlighted (4130)

15-08-2006, 00:52

Yes, they keyboard connector works by default. I know this, because if it didn't work that would be st00pid. I wonder if they were kind enough to add PS/2 mouse support as well tho...

بواسطة poke-1,170

Paragon (1769)

15-08-2006, 00:57

yeah that connector isn't MSX.
Let's also just toss the flashcard, that's not msx either...or VGA port.. not MSx either
Or usb2 ports. Not msx either.
What, all on one chip ? real msx has more then 1 chip. NO msx.
I suppose not buy it then

بواسطة poke-1,170

Paragon (1769)

15-08-2006, 01:01

yeah instead I think they should rerelease the old msx, so it's born dead right from the start.
Guess that's what the world was waiting for.

بواسطة opcode

Expert (110)

15-08-2006, 02:23

A couple of questions for Snout...
Snout, do you know if ASCII is planning to release another issue of MSX Magazine this year, now that the OCM is coming, or are they mostly done with the MSX, since it isn't them that are going to release the OCM? I am a big fan of MSX Magazine and would love to see another issue come out.

Another question: I suppose MSXA is still planning to release upgrades for the OCM in the future, right? Like a MSX2+ or TR upgrade...

I am spreading the news about the OCM in some US forums. There have been a lot of interest on the MSX....

Eduardo

بواسطة opcode

Expert (110)

15-08-2006, 02:29

Two more question:
How about the video out, will it be NTSC or PAL? And does Bazix have plans to distribute the OCM with 110V power suppliers (for us, MSX users living in americas)?

بواسطة iamweasel2

Paladin (707)

15-08-2006, 04:07

actually, some of us, msx users living in (south) america, use 220 V. But that's not a big issue (at least, not to me).

بواسطة snout

Ascended (15187)

15-08-2006, 07:00

Q: Does the PS2 port offer keyboard-support out-of-the-box?
A: Of course, it does

Q: How many gates are left in the default configuration?
A: I don't have the exact current figures at hand, will get back to this, but will for now copy/paste an answer from the old One Chip MSX FAQ (about the old ASCII OCM).

In an MSX2 setup, the amount of gates in use can roughly be devided into the following:

Z80 CPU 18.0%
V9938 VDP 22.3%
PSG 4.0%
SCC 6.5%
MSX-MUSIC 28.1%
Video encoding 2.4%
1 bit DAC 1.7%
PS/2 keyboard interface 2.0%
Cartridge slots and other I/O 6.6%

This configuration includes, like the MSX1 configuration, implementation of MegaSCSI with MSX-DOS2 and FAT16 support. In total, 11050 Logical Elements are being used in this configuration, which is 91% of the total amount of Logical Elements available on the One Chip MSX. However, this code has not been optimized as of yet. By estimation, the Z80 core, the V9938 core and the MSX-MUSIC core can be optimized in order to use only 50% of the Logical Elements they are using at the moment. More recent figures on this are to follow in the near future.

Q: What about the maximum performance?
A: There are a few small settings (Z80 speed, VDP delay, ...) that can already increase performance quite a bit. Given our experiences with the old MSXes, I think it's best to be very careful about stating what the absolute maximum is you can squeeze out of it. How far, fast and feature-rich the OCM will evolve is mainly in the hands of the VHDL-coding future-owners of the OCMs.

Q: Will there be a new ASCII MSX Magazine?
A: I have no information on this. During the release of MSX Magazine 3, I had a brief conversation with the editor-in-chief, who told that it had become increasingly difficult to license good software to fill the CD-ROM. As ASCII was very pleased about the sales figures of the first three editions of MSX Magazine, I think they will at least try and put a fourth to market at some point in time.

Q: Is MSXA to release upgrades for the OCM?
A: The people who made the OCM happen will not stop their work after the release of the OCM. With many new owners of the device, a lot of new OCM-improving VHDL coders will be available. The idea of certifying certain OCM extensions as 'official' and distribute them via the MSX Association and Bazix website still stands. This might be MSX2+ or turboR support, but also something completely different.

Q: Is the video-out NTSC or PAL?
A: NTSC.

Q: How about 110V/220V?
A: The adapter that comes with the OCM has a Japanese power plug and takes 100-240Vac. Bazix will add a converter plug to the OCM package, so that it can be used out-of-the-box in Europe. Afaik, in the US the same 2-pin 110V power plugs are used as in JP, so you should be able to use the OCM out-of-the-box as well.

بواسطة Samor

Prophet (2148)

15-08-2006, 09:46

the device was mentioned on InsertCredit (www.insertcredit.com/),
which I see as a good indication; it hints at the device already getting a lot more attention than last time.

بواسطة opcode

Expert (110)

15-08-2006, 14:25

Snout, thanks a lot for your time answering all my questions. I currently live in Brazil, but I will be moving to the US in two months were I hope to promote and spread the MSX and the OCM. I have been working on a port of the several Pac-Man arcade games for the ColecoVision (which was big in the US) and the MSX, and a bit for my surprise many ColecoVision fans started to get interested in the MSX version, even considering the purchase of a MSX machine. Moreover, many people in the US has started to see the MSX as a kind of lost gem from the 80s, due mainly to the many important game titles it got during that period.

بواسطة poke-1,170

Paragon (1769)

15-08-2006, 14:53

ehhh it is NTSC ? that's... inconvenient

بواسطة snout

Ascended (15187)

15-08-2006, 15:38

Sounds like you're doing a very good job, opcode! Good to see that the MSX is finally getting the attention it deserves in the US.

Btw, the news is up on www.emuita.it as well.

بواسطة mars2000you

Enlighted (6254)

15-08-2006, 17:03

Probably blueMSX as multi-platform emulator (MSX, SVI, Coleco, Sega) has also contributed to the MSX promotion in U.S. !

بواسطة opcode

Expert (110)

15-08-2006, 17:19

Indeed, BlueMSX has helped a lot. It's so easy to use, that even if you have never seen a MSX computer before you can still learn to use BlueMSX very quickly, thanks to its very nice GUI. And BlueMSX is the only emulator currently supporting my ColecoVision RAM expansion.

بواسطة Ivan

Ascended (9305)

15-08-2006, 18:03

Did you notice that the design of the PCB is different from the old 1chip MSX prototype?

بواسطة msd

Paragon (1472)

15-08-2006, 18:29

What is changed in the pcb?

بواسطة snout

Ascended (15187)

15-08-2006, 18:35

added: ROM configurator (for restoring default config)
changed: location of i/o ports (for fitting into that neat casing)

بواسطة djh1697

Paragon (1643)

15-08-2006, 19:54

I am not going to mention the cassette port, but if OCM is a MSX2 machine, why does it not contain the MSX2 logo?

I am sure that some hobbist can come up with a solution to the cassette port, maybe some thing connected to the joystick port? or the USB port?

بواسطة snout

Ascended (15187)

15-08-2006, 20:04

As for the cassette port: you could use one of the audio cinch connectors as an audio-in and connect a cassette recorder to that. Even stated that in the newspost itself. Afaik Manuel Pazos has already demonstrated a prototype which runs with the necessary code. Check over here.

As for the MSX(2) logo: Apart from the fact that the picture is still a non-final prototype, and the final might differ slightly from the picture above, I'm sure you'll agree the OCM is different from any other MSX2 computer. And can be a lot more than that, actually.

بواسطة msd

Paragon (1472)

15-08-2006, 20:06

Afaik Manuel Pazos didn't write that, but the people who make the ocm vhdl at the moment

بواسطة snout

Ascended (15187)

15-08-2006, 20:08

heh.. I had already edited my post... point is though, even before the OCM has hit the streets, there's a VHDL patch for all those casport purists out there! Just one example of how FPGA can come in handy

بواسطة mars2000you

Enlighted (6254)

15-08-2006, 20:23

Ah ... you can edit your post ... and we can't edit our own posts ?

بواسطة msd

Paragon (1472)

15-08-2006, 20:30

@mars2000you: yes how very strange that a mrc admin can change all messages

بواسطة wolf_

Ambassador_ (9971)

15-08-2006, 20:31

* yelling for newspost edit functionfor years already

بواسطة mars2000you

Enlighted (6254)

15-08-2006, 21:42

>@mars2000you: yes how very strange that a mrc admin can change all messages

I can do the same on the blueMSX forum, so I know how it works

بواسطة Guillian

Prophet (3504)

15-08-2006, 23:26

About the cassette port: Kazuhiro Tsujikawa made it. He just changed only about 5 lines of code! Here you can check some games I loaded with the ESE MSX System 3.

بواسطة poke-1,170

Paragon (1769)

16-08-2006, 03:15

Kazuhiro Tsujikawa doesn't sound spanish

بواسطة Sonic_aka_T

Enlighted (4130)

16-08-2006, 14:23

Depends on which part of Spain you're from!

بواسطة snout

Ascended (15187)

20-08-2006, 15:34

OCM news up @ barrapunto.com and cooler-online. (Yeah I know, MSX in the Media challenge... I'm closing in on my MRC ToDo list backlog, but... patience!) :)

بواسطة spl

Paragon (1470)

26-08-2006, 03:28

Hope next news will be: "OCM ready for being sold"

بواسطة Atheus

Expert (73)

01-09-2006, 21:08

System will be in NTSC ... It's a bad new for european people

بواسطة Edwin

Paragon (1182)

01-09-2006, 23:13

I don't much care for either NTSC or PAL. I want RGB output! That'll be project #1.

بواسطة snout

Ascended (15187)

02-09-2006, 03:40

It's already there... just switch a few jumpers on the bottom and (with the right cable) you have an RGB output ready to be used on your TV or old MSX monitor. (yay!)

بواسطة BiFi

Enlighted (4348)

02-09-2006, 07:30

the right cable... only available without one-chip-msx after the release

بواسطة Edwin

Paragon (1182)

02-09-2006, 13:58

Would I be right is guessing that the VGA connector would then be used for RGB output (which it already is really) and that you'd need to make a DB15 -> scart cable?

بواسطة snout

Ascended (15187)

02-09-2006, 18:50

Correct!

بواسطة Raster

Rookie (25)

15-09-2006, 06:20

Awesome stuff!

How many games support MSX2+ only (percentage)? Looking at the specs, it looks like they wanted to keep the colors to 256 or lower, is this is a limitation of the FPGA?

بواسطة snout

Ascended (15187)

17-09-2006, 21:22

More details on the One Chip MSX, info about availability outside Japan

Share

التعليقات (149)