OpenMSX slow and low fps on Raspberry Pi 4

صفحة 7/8
1 | 2 | 3 | 4 | 5 | 6 | | 8

بواسطة DarkSchneider

Paladin (944)

صورة DarkSchneider

08-06-2020, 15:55

On Linux there is no change, the VSYNC is enabled if set as “application” on control panel when changing to fullscreen and set to immediate. Then on Windows should be the same.

بواسطة Grauw

Ascended (10681)

صورة Grauw

08-06-2020, 16:08

In immediate sync mode, on Windows I get tearing in full-screen and judder in windowed mode. On macOS I get judder in both cases.

بواسطة DarkSchneider

Paladin (944)

صورة DarkSchneider

08-06-2020, 21:16

That means that on Windows it really exchanges the display settings, but on MacOS, and I suspect the same on Linux, not.

بواسطة Cool MAN

Supporter (3)

صورة Cool MAN

04-08-2020, 22:23

I am a Fan of your work, which I find magnificent, I have a request for you because I am a beginner on pi4, could you make an image for the pi4, Special MSX, with OpenMSX, because I can not find anything of course the net, I would like to have a direct boot img in MSX with the MSX logo of course, which is derived from the openMSX because it knows best everything on a PI4 of 16 GB and especially which is self-extensible and in network that we can add roms or dsk, many look for it everywhere but nothing reliable, I will be very grateful to you because it cannot be found . OpenMSX0.15.0 Big smile

بواسطة journey

Hero (570)

صورة journey

20-01-2021, 14:32

Hi to all,

Recently i've bought a Raspberry PI 400.
I've tried OpenMSX (0.16) and, indeed, with scaler activated is REALLY slow...
No way to have a FULL SCREEN mode?

I've checked the RENDERER and only the SDL is availabe to me..

If i am not misunderstood, the SDLGL-PP renderer should fix it..
but how can i add this?

I really don't like the 1x image without scanlines... Crying

بواسطة Manuel

Ascended (19220)

صورة Manuel

20-01-2021, 14:49

I'd love to help, but I have no experience with this device or any other RPi.

In general, SDLGL-PP is much faster, as all scaling is done on the hardware (on the GPU). If it's not available, it may be that the OS isn't properly installed or configured, or that the library or hardware doesn't support the required OpenGL version.
You could try the latest development build (it has lower OpenGL requirements) or openMSX 0.15.0 (also lower OpenGL requirements).

بواسطة journey

Hero (570)

صورة journey

20-01-2021, 15:07

Thanx Manuel,

I'm REALLY noop especially with the RPi devices... Crying

بواسطة journey

Hero (570)

صورة journey

20-01-2021, 15:16

بواسطة sdsnatcher73

Prophet (3809)

صورة sdsnatcher73

20-01-2021, 16:52

It could be, it seems for the Pi4 OpenGL in software rendering is much faster than on it’s GPU. Are you running Ubuntu though? Or raspbian? As steps to try I would say:

1. Install Ubuntu 20.04 on a fresh SD card
2. Install all upgrades with apt.
3. Download openMSX 16.0 release

بواسطة Vampier

Prophet (2405)

صورة Vampier

20-01-2021, 22:50

I am not sure how many times I have to tell people about https://www.sedai.it/v1/

This is bare metal openMSX on the pi at full speed and yes the maintainer of Sedai has put the workarounds in place already.

Here is an old video from a previous version https://www.youtube.com/watch?v=dXmj7-PmxFw

صفحة 7/8
1 | 2 | 3 | 4 | 5 | 6 | | 8