MSX Eprom print v3 jumper settings anyone ?

بواسطة SkalTura

Champion (395)

صورة SkalTura

23-10-2022, 09:53

I've been using my MS Eprom print v3 (by Emil Sokolowski) for several years, but for some reason the jumpers fell of when it was in storage.
Now I cannot get it to work anymore.
No matter where I place the jumpers, it skips the cartridge and goes directly to Basic.

The last time I used it was for testing the modified version of Pitfall2, and I checked the Eeprom, and that was still in there (copied 4 times into the 27C512).

Login أوregister لوضع تعليقاتك

بواسطة SkalTura

Champion (395)

صورة SkalTura

23-10-2022, 12:48

Addition information:
Machine used for testing: Philips VG8020/40.
Other cartridge used to check if MSX is still working: Original Kings Vally 1 cartridge.

بواسطة roadfighter

Champion (451)

صورة roadfighter

23-10-2022, 19:11

Hi there SkalTura,
Here is a link to my PDF i made for the pcb, Probably you will have it in the mail somewhere.
Link to the PDF of Eprom PCB v3
Any other questions let me know, my email is in my profile.

P.S. there is a Version 4 now, and it is still available.
cheers,

Emil

بواسطة SkalTura

Champion (395)

صورة SkalTura

24-10-2022, 08:51

Thank you very much Emil !!
I know I had it, but couldn't find it anywhere...

بواسطة SkalTura

Champion (395)

صورة SkalTura

24-10-2022, 11:36

So... Turns out I had the jumpers set correctly from memory, but for some unknown reason the Eeprom (Winbond 27C512) had died on me :-(

بواسطة roadfighter

Champion (451)

صورة roadfighter

24-10-2022, 21:44

Ah oke strange, but now you know the reason why it didn't work anymore.
That's the important thing.
New EPROM and go. Smile

بواسطة SkalTura

Champion (395)

صورة SkalTura

28-10-2022, 09:12

Indeed, with a new Eeprom it worked fine.
No idea why it failed after being in storage for a few years... It's not a UV EEprom, so that can't be it.
It was already a 2nd hand Eeprom, so it could have had a bad life in the past ;-)