MSX unstable when using sunrise CF ATA-IDE

Por edoz

Prophet (2465)

Imagen del edoz

11-08-2010, 19:55

Hi All,

I never notice, because i never used it, but when i insered a second Flash card in my Sunrise CF IDE controler my MSX get unstable... hangings (msx stops working).
I have already swaped different flash cards but the problem is still there..

If i remove the second flash card and using only the first slot there are no problems..

So.. has someone a suggestion ?

Login sesión o register para postear comentarios

Por Jipe

Paragon (1594)

Imagen del Jipe

11-08-2010, 22:39

what's MSX used ?
testing the supply 5V
or try with other MSX

Por RobertVroemisse

Paragon (1325)

Imagen del RobertVroemisse

12-08-2010, 08:59

Is the card in the second slot partitioned right? And what is the size of these cards? I am using two cards as well and never had these problems.

Por edoz

Prophet (2465)

Imagen del edoz

12-08-2010, 10:36

I use a MSX8280 (2+) with FM builed in and 7 Mhz. Also I using a slotexpander with inserted 1024 kb Ram moonsound,IDE CF interface , moonsound, musicmodule(256kb) and GFX 9000 card.
What do you mean by testing the supply 5V ?

The both CF cards are 2GB. The first and second are partitioned with fdisk310. Using both Fat12 and Fat16 partitions. I used also al small CF (32MB) in the secondslot but that gives the same result. If i removed all hardware from my MSX and only use the IDE interface i have the same problem. If i use only 1 CF card there are no problems.. straige isn't is ?

Por Jipe

Paragon (1594)

Imagen del Jipe

12-08-2010, 13:40

yes strange is not a supply problem will all cartridge used

check the pin CF connector

Por Leo

Paragon (1236)

Imagen del Leo

12-08-2010, 21:45

Have you tried 3.5MHz ?
The turbo kit has been installed by yourself ?