Yamaha side slot cartridge adapter - any interest?

Página 1/3
| 2 | 3

Por Alexey

Guardian (2232)

Imagen del Alexey

04-03-2019, 00:19

Is there any interest in the Yamaha side slot cartridge adapter project? The adapter comes with a 3d-printed case and should look like that:

Internally there will be 2 boards and 50 pin ribbon cable between them, nothing else.

Login sesión o register para postear comentarios

Por alexito

Champion (482)

Imagen del alexito

04-03-2019, 01:00

I'm in just for the PCB and the extension connector I think the case is not necessary for me because I wanna try to connect MSX cartridges like the FS-CA1 or FS-UV1

Wink

PS: how long the extension cable can be?

Por max_iwamoto

Champion (456)

Imagen del max_iwamoto

04-03-2019, 00:54

I would like at least 2 of them, complete with case.

Por alexito

Champion (482)

Imagen del alexito

04-03-2019, 01:07

This is just one reason why I want to buy the cartridge adapter.

picture

Por sd_snatcher

Prophet (3019)

Imagen del sd_snatcher

04-03-2019, 14:16

How much will it cost?

Por NYYRIKKI

Enlighted (5299)

Imagen del NYYRIKKI

04-03-2019, 15:00

Yes

Por Alexey

Guardian (2232)

Imagen del Alexey

04-03-2019, 15:36

If I make the batch of 10, then the cost will be around 35-40 Euro for the complete adapter.

Por MSX4ever

Master (171)

Imagen del MSX4ever

04-03-2019, 15:37

I would like one too

Por Grauw

Ascended (8203)

Imagen del Grauw

04-03-2019, 15:39

Also interested in one.

Por sdsnatcher73

Champion (442)

Imagen del sdsnatcher73

04-03-2019, 16:13

Me too!

Por Alexey

Guardian (2232)

Imagen del Alexey

05-03-2019, 03:18

Ok, boards' design is ready, the 3D model has been adjusted a bit.

Now printing the case...

Página 1/3
| 2 | 3