Looking for a memory counter rom (NMS8250)

Página 2/3
1 | | 3

Por sdsnatcher73

Prophet (3675)

Imagen del sdsnatcher73

23-01-2021, 12:24

It may still be some (small) issue with the mapper circuitry then, possibly in the back annotation bits. You can check that with testmap.com I think.

Por hansgoos

Rookie (17)

Imagen del hansgoos

24-01-2021, 12:04

When running testmap.com I see some ' Back annotat. stutter' messages in the beginning (pressing space-bar does continue the test) but in the end the result shows "This mapper is oke" ?

@Alexey: The 'yis503iii_msx2sub_special.rom' ROM isn't working on my NMS8250. With this ROM installed screen stays black and nothing happens. Does this ROM maybe also needs another BIOS ROM?

Por Manuel

Ascended (19059)

Imagen del Manuel

24-01-2021, 15:17

Mapper size: 6 bits, back annotation: 5 bits... that explains perhaps?

Por sdsnatcher73

Prophet (3675)

Imagen del sdsnatcher73

24-01-2021, 15:30

Manuel wrote:

Mapper size: 6 bits, back annotation: 5 bits... that explains perhaps?

Probably that is the reason the BIOS does not detect the full 1024kB.

Por Grauw

Ascended (10639)

Imagen del Grauw

24-01-2021, 15:33

Surely the BIOS does not read the mapper port?

Por Manuel

Ascended (19059)

Imagen del Manuel

24-01-2021, 17:14

If it was a non-official hack on a BIOS it may be possible.

Por hansgoos

Rookie (17)

Imagen del hansgoos

26-01-2021, 08:09

I checked the wiring of the memory upgrade I did (I used the following instructions 1 MB PC-SIMM in NMS 8250/55), and all looks OK.

What would be the most obvious reason I miss an annotation bit? Is that because of bad/wrong wiring, faulty IC or faulty SIMM ?

Por sdsnatcher73

Prophet (3675)

Imagen del sdsnatcher73

26-01-2021, 08:22

So you have 5 bit back annotation which should be 6. schematics indicate you add back annotation on D3, D4 and D5 using the 74LS125. It seems the D5 back annotation, which is bit 6, is not working as expected. So start checking that connection and the 74LS125.

Por Wierzbowsky

Guardian (3528)

Imagen del Wierzbowsky

26-01-2021, 12:36

hansgoos wrote:

@Alexey: The 'yis503iii_msx2sub_special.rom' ROM isn't working on my NMS8250. With this ROM installed screen stays black and nothing happens. Does this ROM maybe also needs another BIOS ROM?

Sorry, I didn't realize the extent of the messed up ROM layout in NMS 8250. This ROM will not work there.

Por hansgoos

Rookie (17)

Imagen del hansgoos

28-01-2021, 21:37

I found the issue. Pin 4 of IC 74LS125 wasn't connected properly with the IC underneath.

Now TESTMAP shows 6 'back annotation bits', is no longer reporting any errors AND my start screen shows 1024Kb of user RAM Smile

Thank you all for your help!

Página 2/3
1 | | 3