Hit Bit w/broken graphics

Página 1/4
| 2 | 3 | 4

Por pseen

Resident (60)

Imagen del pseen

17-07-2003, 00:41

Does anybody know if it would be easy to fix or replace the graphics chip of my Sony Hit Bit HB75-P? I unintentionally inserted one cartridge in each slot, and afterwards the graphics are distorted.

This happened back in 89 when I was a kid, and fortunately my father got me an SVI738 as a replacement for christmas that year. But now I would like to repair it and start playing with it again.

Any help appreciated. Thanks!

Login sesión o register para postear comentarios

Por MOA

Champion (293)

Imagen del MOA

17-07-2003, 00:52

Trying to find a new one is easier Smile

Otherwise try to contact Texas Instruments for a new videochip (or did Yamaha also make the MSX1 version? It's a TI-something, I think... and Yamaha made the v9938 for MSX 2 which was backwards compatible with the TI-chip.)

Worst case: your VDP is embedded in some other chip. In that case: forget it or get a replacement for that 'other' chip Smile

Hmm... Somehow I have this feeling that my post is not much of a help!

Por anonymous

incognito ergo sum (109)

Imagen del anonymous

17-07-2003, 01:08

I don't think VDP's were embedded in MSX1's :/
The chip you need is a Texas Instruments TMS9918 or 9928 or 9929, depending on NTSC or PAL and RGB or composite. As far as I know the 75P has a RGB SCART connector. Anyway, the number is on the chip Smile
If you're lucky it's in a socket, otherwise you'll have to do some (de)soldering.

Por pseen

Resident (60)

Imagen del pseen

19-07-2003, 16:14

Thanks for the quick replies!

Any idea where I can get the mentioned chips, and what they will cost me?

Por anonymous

incognito ergo sum (109)

Imagen del anonymous

19-07-2003, 18:28

I'm sure you can find suppliers on the web, no idea of the costs, but it can't be much.

Por Manuel

Ascended (16110)

Imagen del Manuel

19-07-2003, 19:09

Note that the VDP may be broken, but also the VRAM may be broken and the VDP not.

Por MOA

Champion (293)

Imagen del MOA

19-07-2003, 21:18

Note that the VDP may be broken, but also the VRAM may be broken and the VDP not.

Makes sense! Can you tell us what really happens on that screen of yours, pseen?

It's not that hard to write some VRAM test programs, btw. Maybe someone can write some VDP/VRAM test tool...?

Por pseen

Resident (60)

Imagen del pseen

20-07-2003, 12:24

Yes, it does make sense that the RAM may be broken, and not the chip.

What happens is, I get a very distorted picture, where blocks of pixels seem to be displaced and copied around on the screen. You can barely make out the outline of the Konami logo when playing a cartridge, for instance. I'll see if I can get some pictures up!

Again, thanks for the interest!

Por pseen

Resident (60)

Imagen del pseen

25-09-2013, 20:38

OK, a 10+ year bump. Hope I'm not out of line...

A small update: I opened the HIT BIT and had a look. After pulling two plastic clips, removing a rectangular alu heat sink and rubbing off some blue gooey heat conducting material, I found the chip. GuyveR800 was right, it's a TMS9929. I suppose the eight chips right below it are the video RAM chips. Seeing as none of them are in sockets, I'll probably wait a few more years before I try to desolder and replace them... Shocked!

Por Marq

Champion (386)

Imagen del Marq

25-09-2013, 21:05

TestRAM from here: http://www.alsoftware.com.br/adrianpage/index.php?page=msxsoft&section=util could give some hint, in case you see enough of what's going on...

Por pseen

Resident (60)

Imagen del pseen

25-09-2013, 21:12

Awesome, will try to give it a go!

Página 1/4
| 2 | 3 | 4