Panasonic FS-A1GT power supply

Thanks for dimensions Jipe, its ok.

Only D and C would be a real problem.

D is a bit more smaller (54 vs 60), the only problem perhaps is C, begin 17mm higher.

E might be a problem too due to ON/OFF switcher, keyboard and external case.

I can do some mod inside, so its ok.

If I use a smaller (800mA, 24W) version is just a little bit smaller:
A=80mm vs 89mm
B=70mm vs 83mm
C=58mm vs 67mm
D=46mm vs 54mm
E=97mm vs 107mm

C wouldn't be a problem anymore, but 24W is too on limit.

Under a ST 100v 21W
Under a GT 100v 22W

I know, but it doesn't says is the max rated.

ST:

GT:

the maximum is not important you can use a 100w if you want

the maximum dimension is important if you want put the transformer inside the Turbo-R

Well that one is just 42W and is already bigger.

There are few options when electronics comes around here on Brazil.

why not an external AC adaptor, and let the msx ORIGINAL, not loosing value!.

@Gradius2: did you finally succeeded with your power supply? Maybe other people can use that information as well.