The cartridge you are waiting for 3000 years !

Page 21/21
14 | 15 | 16 | 17 | 18 | 19 | 20 |

By ericb59

Paladin (732)

ericb59's picture

30-11-2014, 14:40

Overall, I Never got problem with all cartridges I've made...
The one GDX had problem was not produced by Repro-Factory, this perhaps the explanation Wink

By Grauw

Enlighted (6180)

Grauw's picture

30-11-2014, 18:28

valkyre wrote:

@gdx-the case is conductive although i failed to get continuity between the case and contacts.However as a precaution i have opened the cartridge and ran a strip of clear tape down each side of the case where the contacts protrude. Panic over!

Indeed the case is conductive, interesting! However, there’s 1mm of space between the edge of the case and where the contacts begin, so there is no problem. Nevertheless I took the same precaution as valkyre, you can do so without damaging the label.

By hbarcellos

Hero (546)

hbarcellos's picture

30-11-2014, 19:28

ericb59 wrote:

Overall, I Never got problem with all cartridges I've made...
The one GDX had problem was not produced by Repro-Factory, this perhaps the explanation Wink

+
In Eric we trust!

By hbarcellos

Hero (546)

hbarcellos's picture

19-01-2015, 23:18

up!
Helping Eric to sell more cartridges.

By ARTRAG

Enlighted (5866)

ARTRAG's picture

20-01-2015, 07:10

Secret: boot keeping esc pressed to enable an extra hidden game!
Time Pilot, ported from colecovision with new sound code and six

By gdx

Paragon (1606)

gdx's picture

20-01-2015, 08:23

No problem for Ericb59 because the PCB solder mask of Tutankham prevents the short-circuit. The pins are not long.

I warned here because I've had this problem with another PCB. Two welds touched sometime the casing. A Korean has put adhesive tape in Luxury Box 8 to fix this problem.

http://blog.naver.com/isisjr/10183133984

I filed down a bit the casing.

Page 21/21
14 | 15 | 16 | 17 | 18 | 19 | 20 |
My MSX profile