MCM website

Page 2/3
1 | | 3

By Philip

Champion (363)

Philip's picture

23-03-2018, 14:11

Well, better late than never Smile Page 12 is missing in MCM42. It has page 11 twice....

By ro

Guardian (4008)

ro's picture

23-03-2018, 21:59

Still no official release?

By Philip

Champion (363)

Philip's picture

23-03-2018, 22:50

Manuel wrote:

The official launch will be in March...

There will be another March next year Smile

By Manuel

Ascended (14738)

Manuel's picture

27-04-2018, 22:13

Philip wrote:

Well, better late than never Smile Page 12 is missing in MCM42. It has page 11 twice....

Should be fixed now, thanks for reporting!

By Meits

Scribe (5183)

Meits's picture

27-04-2018, 22:19

About reporting. The list is a bit too long, so please check yourself if the used webmsx machine settings are correct for all disks. I ran into several which went wrong.

By Manuel

Ascended (14738)

Manuel's picture

28-04-2018, 00:45

Please report any that are wrong here and I will fix them. We did our best to make them correct but testing them all goes a bit too far... there are over 1000 "listings" listed on the website...

By Meits

Scribe (5183)

Meits's picture

28-04-2018, 03:49

You could change all into msx2+ with enough ram... That'd rid you of probably every mistake.

By Manuel

Ascended (14738)

Manuel's picture

28-04-2018, 09:40

Yes, but we didn't do that on purpose, as we wanted to have these things run on the MSX generation they were targeted for.

By Meits

Scribe (5183)

Meits's picture

28-04-2018, 12:21

that has turned out to be a bit of an unlucky choice then, since you have to test everything manually.

By Manuel

Ascended (14738)

Manuel's picture

28-04-2018, 14:34

We thought we had a fairly good idea for which system each program is targeted... So, still curious which are wrong.

Page 2/3
1 | | 3
My MSX profile