Need your opinion regarding GR8NET capabilities

Page 25/58
18 | 19 | 20 | 21 | 22 | 23 | 24 | | 26 | 27 | 28 | 29 | 30

By Victor

Champion (480)

Victor's picture

31-01-2016, 19:07

Eugeny_Brychkov wrote:

I have integrated GR8NET firmware with Disk-BASIC,

Where is that new firmware?? I can't find it in http://www.gr8bit.ru/software/firmware/GR8NET/

By Eugeny_Brychkov

Paragon (1166)

Eugeny_Brychkov's picture

31-01-2016, 19:26

Victor, not yet, hold on. I need to clean it up little more.

From you all I need opinion if what I did is useful or not.

By Victor

Champion (480)

Victor's picture

31-01-2016, 20:09

Of course it's useful!!

The best would be to integrate that with the NETBROWSER. If I have a game in DSK and press ENTER (for example), the game will launch. That would be amazing!!

I want to talk you about some issues that I have found in the SCC emulation. There is some strange sounds. Try these:

- King's Valley II: When you throw the sword. The sound while the sword is spinning....

- Nemesis 3: When you defeat a fibal boss. The explosion sounds strange too...

- And, on the other hand, in my opinion the PSG from the MSX is very very low... In the mixer from MSX Turbo R the SCC is always higuer in a real SCC game... but with the GR8NET, the difference is bigger... in my opinion...

By raymond

Champion (447)

raymond's picture

31-01-2016, 21:34

It looks like a big step forward. For me it would be very nice if I could use the micro SD card slot as a harddisk. Thus booting from it and getting into MSX-DOS 2. I do think this option is usefull, when you have a lot of diskimages on your sd-card you will now be able to actually use them as a disk. Are these diskimages writable or read only when mounted?

A problem I ran into with my GR8NET is that my DHCP server is not always that fast in providing an IP-address... When starting my MSX it doesn't get an IP-address and after resetting it will then get the IP address. Is it possible to wait just a little bit longer for receiving an IP address (or can I adjust this myself)?

By edoz

Prophet (2298)

edoz's picture

03-02-2016, 12:34

How can i access the SD card in MSX basic? Is there a listing i can use? just for testing?

By edoz

Prophet (2298)

edoz's picture

03-02-2016, 12:46

Oh wait i see the gr8sdc.asc routine
will try that!

By edoz

Prophet (2298)

edoz's picture

03-02-2016, 12:57

If i try the gr8sdc.asc i got and error in 230 (device I/O error in 230) when reading the MBR.. any thing i could try ?
The SD card is a 7 GB card and formatted as FAT32. I als tried a other SD using FAT16. But gives the same results.

By edoz

Prophet (2298)

edoz's picture

03-02-2016, 13:05

Funny thing is that it works with a small 256mb MicroSD ! (fat16) But it seems not with a 4GB or 8GB ScanDisk MicroSD/HC.

By Eugeny_Brychkov

Paragon (1166)

Eugeny_Brychkov's picture

03-02-2016, 13:21

edoz wrote:

If i try the gr8sdc.asc i got and error in 230 (device I/O error in 230) when reading the MBR..

Send me photo of output of the following command callnetdump(&hc9,&h5fc0,128) after you get this error.

By edoz

Prophet (2298)

edoz's picture

03-02-2016, 13:25

BDW: It seems also that my audio is not working anymore if the GR8NET is inserted on my 8280.
I think it is the same problem with the MegaSD.

https://www.msx.org/forum/msx-talk/hardware/philips-nms-825082558280-mixing-issues?page=0

Page 25/58
18 | 19 | 20 | 21 | 22 | 23 | 24 | | 26 | 27 | 28 | 29 | 30