Altera DE0-Nano MSX

Page 2/2
1 |

By JCCyC

Supporter (10)

JCCyC's picture

31-03-2015, 01:18

Nice! Does it support physical cartridges?

By falcmax

Supporter (3)

falcmax's picture

01-04-2015, 19:50

No, physical cartridges are not supported, the de0-nano has 3.3 volt I/O interface, the cartridges I suppose 5V.

Is necessary level translator, is not impossible but my shield do not have this kind of interface, may be using the 2nd I/O connector of de0 nano witha dedicated board.

Regards

By rh

Supporter (1)

rh's picture

17-06-2015, 02:24

I'm new to electornics in general and just discovered FPGA because of this article. I've found it very interesting and got myself a DE0 Nano. So far, I have the VGA and SDCard working. However, I couldn't complete the PS2 interface yet. Does anyone knows the values for the 4 diodes on the schematics at http://caro.su/msx/ocm_de0n.htm ?

Thanks!

Page 2/2
1 |