The Big MegaFlashROM SCC+ SD Topic

Page 6/90
1 | 2 | 3 | 4 | 5 | | 7 | 8 | 9 | 10 | 11

By OeiOeiVogeltje

Paragon (1348)

OeiOeiVogeltje's picture

09-04-2013, 19:49

yes i know
but it looks ugly
i HAVE to put two lines in my autoexec.bat
and i get two different outputs

By ray2day

Champion (490)

ray2day's picture

09-04-2013, 20:21

Quote:

but it looks ugly

as I hear it seems to fit perfectly with that ugly black Turbo-R you have... Wink Tongue LOL!

By OeiOeiVogeltje

Paragon (1348)

OeiOeiVogeltje's picture

09-04-2013, 21:02

your ears are full of shit
So i heard
pluh

By Guillian

Prophet (3306)

Guillian's picture

10-04-2013, 09:07

Here is a MegaFlashROM SCC+ SD tutorial in English. It is focused on MSX1/DOS1.

By Meits

Scribe (5856)

Meits's picture

10-04-2013, 12:30

Is it possible to peek/inp in basic in which slot the cartridge is inserted?
During boot I jump to basic to set some basic settings incl F keys... Thereafter I return to DOS to execute another batch file... In this batchfile I want to set MAPDRV...
If I have two of those batch files (one for cartridge in slot 1 and one for slot 2) then I've to peek in this little basic program where the cartridge is inserted...

By Guillian

Prophet (3306)

Guillian's picture

10-04-2013, 12:52

You can omit the slot when using mapdrv if you run the command from a MegaFlashROM SCC+ SD drive.
So you can use:
MAPDRV C: 1-0 3
to mount in C: partition 1 of SD slot 2

By Meits

Scribe (5856)

Meits's picture

10-04-2013, 12:57

So the slot in which the cartridge is inserted is not required in the MAPDRV syntax?

By Guillian

Prophet (3306)

Guillian's picture

10-04-2013, 13:17

It is not requiered if you run it from a drive with the same driver you want to use.
But I have tested and it only works if the drive has been already mounted.

In the WIP Nextor version you can use "0" to use the slot of the primary disk driver.

By now you will need to select the slot. Perhaps you can use #f348 to check the current diskROM slot
I.e.: PRINT PEEK(&Hf348) AND 3

By Meits

Scribe (5856)

Meits's picture

10-04-2013, 14:55

That works... Thanks...

By Meits

Scribe (5856)

Meits's picture

10-04-2013, 15:30

As of now I got the following boot sequence:
Autoexec.bat gets booted and sets path and aliases. At the end a basic program gets started.
In the basic program I set all my default screen settings (some programs like to temper with them) and my function keys which become easy short keys to oftenly used commands in DOS/Nextor environment. Then it checks in which slot the interface is inserted and sets which batch file should be loaded after the _system in the basic program (one batch file for each possible cartridge slot).
Back in Nextor the batch file for the right cartridge slot gets loaded to map the drive letters correctly and the ralloc command is executed for each partition.
Before this I could only use the cartridge in slot 1 and it would give errors when inserted in slot 2. Now it's all nice Smile

It takes a while and some detective work, but once that's done it nears perfection Smile

Page 6/90
1 | 2 | 3 | 4 | 5 | | 7 | 8 | 9 | 10 | 11