Composite video directly from v9938 VDP

By rasool

Supporter (5)

rasool's picture

07-04-2020, 23:23

Hi guys,
I am trying to connect my Daewoo CPC-300 to a TV through composite video out. I don't want to use the PAL encoder since its video output is not good (at least in my machine). I found that v9938 has a composite video out pin. I connected that pin to the TV through a cable (with GND) and it worked but in black and white. I executed "VDP(10) = VDP(10) and &HFD" command (to use NTSC) in MSX-BASIC and the color showed up but with one problem. There are many color artifact appeared in the white text as you can see in the photos below. Anyone knows what is the problem?
Thanks a lot!

Login or register to post comments