Converting MSX from PAL to NTSC

Page 2/3
1 | | 3

By dhau

Paragon (1570)

dhau's picture

06-07-2008, 19:11

T7937A MSX1 died while I tried to hook up floppy drive. I may try to fix it in distant future, but for now, nothing more I can do.

I dumped AX350II system ROMs, together with MSXMEM2.BAS screen capture.

By Manuel

Ascended (19060)

Manuel's picture

06-07-2008, 23:27

Thanks! I'm still studying the results... I'll get back to you on this.

By dhau

Paragon (1570)

dhau's picture

07-07-2008, 15:08

Hi Manuel, only number-number[-number].rom are from computer. The other roms are junk, I forgot to remove them after comparing to existing MEP roms. Please kill them Smile

By Manuel

Ascended (19060)

Manuel's picture

07-07-2008, 19:23

dhau, OK. One problem is that the Painter ROM file was only 32kB, while it should be 64kB, as far as I know. It probably has a special mapper.

By dhau

Paragon (1570)

dhau's picture

07-07-2008, 20:25

uhm, ok. How do I work with this special mapper?

By Manuel

Ascended (19060)

Manuel's picture

07-07-2008, 20:54

dhau - not sure yet.... How did you know what kind of software was in which slot?

By dhau

Paragon (1570)

dhau's picture

07-07-2008, 23:38

3-0 has plain text "YMHPAINTER85" shortly after AB header, so I assumed it's Painter.

By Manuel

Ascended (19060)

Manuel's picture

08-07-2008, 19:05

And the others?

By Manuel

Ascended (19060)

Manuel's picture

31-07-2008, 22:54

dhau?

By dhau

Paragon (1570)

dhau's picture

02-08-2008, 16:27

Please check and dump archive I sent you. The analysis I did is very superficial, you are much better suited to determine the purpose of rom dumps.

Page 2/3
1 | | 3