Finishing PLATOTerm.

Page 2/2
1 |

By TomH

Master (242)

TomH's picture

09-11-2018, 19:05

Yeah, that could be a hassle for the Sam; I have one in storage back in the UK with a Trinity ethernet adaptor but if memory serves then Colin who runs Quazar prefers that his hardware not be emulated, and Simon who writes what is essentially the only Sam Coupé emulator, respects that. The base hardware only has serial communications via MIDI, and I'm also unsure whether the 'comms interface' (with regular RS232) is emulated.

Oh well.

By tschak909

Rookie (26)

tschak909's picture

09-11-2018, 19:24

and for the record, am located in Denton, TX, USA (yes, I know...far far away from the rest of the MSX community.. the machines never made it over here, save for the Yamaha CX5M), the only reason I know of them, is because my father and I travelled constantly, when I was younger, and we were both very much involved in various microcomputer scenes as users and developers. While I have used MSX in the past, this is my first MSX application I am developing.

By tschak909

Rookie (26)

tschak909's picture

10-11-2018, 06:51

So far, I've converted Nestor's SDCC code to z88dk, and it compiles, but I am attempting to debug AsmCall (I suspect that IX is being trashed)... will try to get some help from the z88dk guys.

-Thom

By tschak909

Rookie (26)

tschak909's picture

12-11-2018, 03:33

I have ported the SDCC helpers to z88dk. They seem to execute, but parameter passing isn't working as expected. (even with the appropriate header prologue)..am trying to talk to konamiman to see if there is something special about doing UNAPI calls under MSX-DOS 1...

-Thom

Page 2/2
1 |
My MSX profile