Game cartridge board for SV-328 and SVI-328

Page 2/2
1 |

By Rastersoft

Supporter (4)

Rastersoft's picture

27-07-2020, 04:11

Sorry for digging up an old thread, but I wanted to add in the resistor and capacitor values in case someone comes along later looking for the values.

The video has the PCAD 2002 files, which I was able to convert to the ASCII version.
It can be downloaded from here: http://www.rastersoft.net/files/GAME_CRT.zip

The ASCII version shows that the values are:
R1: 4.7k. It's an 0805 surface mount part.
R2: 4.7k. It's an 0805 surface mount part.
R3: 2k. It's an 0805 surface mount part.
C1: 0.1 (assuming uF). It's an 0805 surface mount part.
VD1: Is a LED.

The ASCII version will open in BuddyCAD.

By Alexey

Guardian (2792)

Alexey's picture

27-07-2020, 13:43

I will ask the designer of this cartridge whether I can share his files to the community on RBSC's website. That includes the instructions, board and Gerber files.

By Alexey

Guardian (2792)

Alexey's picture

28-07-2020, 17:52

After getting the permission from the author, I've uploaded both versions of the cartridge for the SVI-328 into the repository:

https://github.com/Wierzbowsky/SVI-328_Cartridge

The second version is functionally identical to the first one, however there's a place for the 74LS08 in SOIC casing on the board.

By Rastersoft

Supporter (4)

Rastersoft's picture

01-08-2020, 00:24

This version mentions using 2K resistors for all three, instead of 2 being 4.7k.

It works with 2.2k on the board I got through PCBWay.

I was able to run my own game project without issues.

Page 2/2
1 |