list of interested third batch MSX Zemmix Neo:

Page 12/17
5 | 6 | 7 | 8 | 9 | 10 | 11 | | 13 | 14 | 15 | 16 | 17

By fzanoto

Master (190)

fzanoto's picture

11-12-2015, 12:54

this version, don´t have the "knob" for ajust scanlines.

By fandenivoldsk

Supporter (16)

fandenivoldsk's picture

14-12-2015, 18:07

I just registered for the third batch MSX Zemmix Neo. Do I get any mail in reply, so I know I am added to the list, or am I too late?

By fzanoto

Master (190)

fzanoto's picture

14-12-2015, 18:49

emails for 3 batch
only in 2016

please
wait..

By AxelStone

Prophet (3189)

AxelStone's picture

17-12-2015, 21:45

Algorythms wrote:

Hi, is this configuration correct? I have bought this cable (VGA to Scart Zemmix Neo) and I've tried it with video output configured in 2nd position (RGB + Audio mono) but I obtain a black image. I've tried positions 1 (RCA/S-Video) and 4 (VGA 31khz progressive) and works fine, so I don't know if it's a matter with cable or with DIP switches.

Somebody has tried it? Thanks.

By mfeingol

Champion (293)

mfeingol's picture

19-12-2015, 20:54

I just received mine. It came without an AC adapter. Anyone know the precise specs for an AC adapter for these units?

Thanks.

By mtn

Champion (269)

mtn's picture

19-12-2015, 21:44

Received mine some days ago. Smile

5VDC / 1A and (+)/positive in center..

By mfeingol

Champion (293)

mfeingol's picture

20-12-2015, 08:45

Thanks, mtn. That works.

I spent a couple of hours playing with the Neo Zemmix. I feel like I've barely scratched the surface.

I installed DOS2 on a 2GB SD card, and the Zemmix booted to DOS2 without problems. I enabled SW4 and was able to run a couple of roms using romload. I ran sri.com and was able to run a DSK file.

I'm still struggling with the video output. Direct VGA output to an LCD monitor looks too blocky with SW2 and SW3 enabled. Disabling SW3 gets me nice scanlines, but the output is very red-tinted. And when I run the VGA output through a VGA-to-HDMI converter, 15,4,4 looks like yellow on black. So I'm not able to get good output over HDMI to my HD TV.

Did anyone have better luck with that, or have a VGA-to-HDMI adapter to recommend? Ir is there a way to get the Zemmix to output Y/Pr/Pb, so a component splitter would work?

I'd also love a pointer to a manual, if someone has one. It seems like there's a number of keys that do certain things, like F12 changes CPU speed, and PrintScr does ... something to the output.

By riquet

Master (200)

riquet's picture

20-12-2015, 09:58

@mefeingol : br manual here

By raymond

Hero (622)

raymond's picture

20-12-2015, 11:40

mfeingol wrote:

Thanks, mtn. That works.

I spent a couple of hours playing with the Neo Zemmix. I feel like I've barely scratched the surface.

I installed DOS2 on a 2GB SD card, and the Zemmix booted to DOS2 without problems. I enabled SW4 and was able to run a couple of roms using romload. I ran sri.com and was able to run a DSK file.

I'm still struggling with the video output. Direct VGA output to an LCD monitor looks too blocky with SW2 and SW3 enabled. Disabling SW3 gets me nice scanlines, but the output is very red-tinted. And when I run the VGA output through a VGA-to-HDMI converter, 15,4,4 looks like yellow on black. So I'm not able to get good output over HDMI to my HD TV.

Did anyone have better luck with that, or have a VGA-to-HDMI adapter to recommend? Ir is there a way to get the Zemmix to output Y/Pr/Pb, so a component splitter would work?

I'd also love a pointer to a manual, if someone has one. It seems like there's a number of keys that do certain things, like F12 changes CPU speed, and PrintScr does ... something to the output.

I've received mine Friday. Output via VGA was a bit purple, replaced the VGA cable and that has been solved now LOL! I only have scanlines now, which I would like to get rid off...

By giuseve

Paladin (754)

giuseve's picture

20-12-2015, 16:46

Thanks Riquet..
What about an English manual?

Page 12/17
5 | 6 | 7 | 8 | 9 | 10 | 11 | | 13 | 14 | 15 | 16 | 17