list of interested third batch MSX Zemmix Neo:

Page 14/17
7 | 8 | 9 | 10 | 11 | 12 | 13 | | 15 | 16 | 17

By giuseve

Paladin (753)

giuseve's picture

24-02-2016, 19:25

News about 3rd batch?
Which is the problem with the VGA output?
May i use it with my LCD monitor?

Regards

By AxelStone

Prophet (3176)

AxelStone's picture

24-02-2016, 19:31

mtn wrote:

I guess I can just cut the connector off from the megadrive-pad and throw in a autofire circuit while at it, and put on a proper metal DE-9 instead of the rubberplastic type

In my case, I'm going to replace the original DB9 of my VG for one this:
[img]http://i.ebayimg.com/00/s/NDg1WDYwMA==/z/GH8AAMXQEgpTEPQ5/$_12.JPG[/img]

This port can be screwed to the VG case so all the pressure is suported by case, not by motherboard, when you plug/unplug your pad.

By fzanoto

Master (190)

fzanoto's picture

29-02-2016, 22:33

giuseve wrote:

News about 3rd batch?
Which is the problem with the VGA output?
May i use it with my LCD monitor?

Regards

it works with any monitor.
I'm finishing the second batch, only to start the third batch

By anonymous

incognito ergo sum (116)

anonymous's picture

02-03-2016, 17:17

hi friend im interesting how i can get one? thanks

By fzanoto

Master (190)

fzanoto's picture

02-03-2016, 21:06

just fill in the form and wait for instructions by email.

By raymond

Hero (616)

raymond's picture

03-03-2016, 07:40

giuseve wrote:

News about 3rd batch?
Which is the problem with the VGA output?
May i use it with my LCD monitor?

Regards

Mine has a purple-ish output. Tried a different VGA cable and LCD monitor, but with no effect Sad

By Panzer-

Paragon (1041)

Panzer-'s picture

31-03-2016, 19:34

News about 3rd batch?
Regards

By correodiegols

Expert (76)

correodiegols's picture

04-04-2016, 12:23

Registered

By mygodess

Champion (275)

mygodess's picture

09-05-2016, 08:16

It seems to me it uses just same PCB layout as I opened in here Smile

By fzanoto

Master (190)

fzanoto's picture

09-05-2016, 13:20

mygodess wrote:

It seems to me it uses just same PCB layout as I opened in here Smile

Yes !!

Page 14/17
7 | 8 | 9 | 10 | 11 | 12 | 13 | | 15 | 16 | 17