Mini IQ3000 (Temporarily name for small project)

Page 7/10
1 | 2 | 3 | 4 | 5 | 6 | | 8 | 9 | 10

By giuseve

Paladin (735)

giuseve's picture

19-06-2014, 21:22

Ok, you've convinced me.
Please post:
- HW and SF feature
- MSX Compatibility Problems
- Total costo included shipping to Italy.

Yeah !!! You're great !!!

PS: Any news from Brazil about guys of MSX3 team?

By Grauw

Ascended (8615)

Grauw's picture

19-06-2014, 21:56

@guiseve Please read earlier posts…

mygodess wrote:

Technical spec is similar with OCM. Just a little bit different.
This one has Scanline generator and Speaker amp with speaker inside.

For more details on the tech specs of the One Chip MSX see here and here. Generally speaking, it is an MSX2+ with 10MHz CPU and built-in SD interface.

The One Chip MSX has some MSX compatibility problems but overall it works fine, and it gets better all the time thanks to the hard work of KdL & co.

Note that if you look at the pictures it has 1 cartridge slot. For a second slot you probably need some kind of adapter.

Also a few posts ago mygoddess said to contact by mail if you’re interested:

mygodess wrote:

If someone wants to get it then just send me e-mail. (mygodess@gmail.com)

By giuseve

Paladin (735)

giuseve's picture

19-06-2014, 22:23

In my opinion also ram is different with 4mb instead of 1mb of the ocm.
so.
how many slots totally? which kind of adapter for the 2nd slot? ram? which video output? vga? hdmi? ntsc, secam or pal? which max resolution? which keyboard layouts available? is sd drive included? is a floppy emulation or a ide emulation? what are the compatibility issue? many or more or different from ocm?

i think that are reasonable questions.

By msxholder

Champion (338)

msxholder's picture

19-06-2014, 23:13

It's an nice piece of HW as earlier said I want one.
It has 2 slots one similar for msx the backside is similar as flatcable connector.
By dipswitch you can select amount of memory 2 or 4 meg
video out is rca or/and svideo also Vga 31/60kHz and Vga +scanline
It has Int Keyboard lay out
3 dipswitch for selecting slot1/2 or ascii 8/16kB bank or ese MegaSCC+ 1Meg
sd card or mmc reader /writer fat 16 max 2Gb
you can choose audio internal on or off
I WANT ONE !!

By Grauw

Ascended (8615)

Grauw's picture

19-06-2014, 23:39

giuseve wrote:

In my opinion also ram is different with 4mb instead of 1mb of the ocm.

OCM with latest KdL firmware has 2 MB RAM and can be switched to 4 MB using a DIP switch. It’s the same.

By Grauw

Ascended (8615)

Grauw's picture

20-06-2014, 00:04

@mygodess Can IQ3000 owners install KdL’s Zemmix Neo firmware builds, or is a separate build required?

By mygodess

Champion (259)

mygodess's picture

20-06-2014, 02:06

@Grauw
It needs separate build for the keyboard issue.
I just disabled numlock key because miniIQ does not have num keys Smile

By giuseve

Paladin (735)

giuseve's picture

21-06-2014, 14:14

@mygodess
mail sent. I'm interested in.
Let me know and congratulations for your fantastic job.

PS: Has your IQ3000 a kind of .DSK launcher similar to the .ROM launcher we see in the videos?

By mygodess

Champion (259)

mygodess's picture

21-06-2014, 20:17

@giuseve
There is dsk launcher named ZLoader. (ZLoader supports rom files and also dsk (Multi disk also) files)
ZLoader is just for OCM compatible hardware cause Zemmix Neo, MiniIQ kinds of hardware could use it.

By riquet

Master (166)

riquet's picture

21-06-2014, 22:25

rom loader (mega rom 512 Ko like MG2 ?) + dsk loader, very interesting and very nice object.

Page 7/10
1 | 2 | 3 | 4 | 5 | 6 | | 8 | 9 | 10