MSX cartridge cases

Page 3/5
1 | 2 | | 4 | 5

By st1mpy

Paladin (800)

st1mpy's picture

23-10-2015, 00:09

how do you buy from out side Brasil?

By Paulo Maluf

Supporter (5)

Paulo Maluf's picture

23-10-2015, 22:01

Yes, i send wordwide, and accept paypal.

By zPasi

Champion (499)

zPasi's picture

31-10-2015, 19:44

Paulo Maluf wrote:

Yes, i send wordwide, and accept paypal.

How would I place the order? I don't speak / read Portuguese.

How much the clear cart cases + postage to EU (Finland)?

Is the SD megaram still available? How much for that, in EUR?

By NYYRIKKI

Enlighted (5837)

NYYRIKKI's picture

31-10-2015, 20:14

I might be interested in buying some cartridge cases and also sharing the postage to Finland.
How ever I need to know how the hole places in PCB should be located compared to bottom of the connector. I have few PCB's from Emil Sokolowski and few cases from Sunrise, but unfortunately they are not compatible.

By roadfighter

Champion (421)

roadfighter's picture

31-10-2015, 23:00

NYYRIKKI wrote:

I might be interested in buying some cartridge cases and also sharing the postage to Finland.
How ever I need to know how the hole places in PCB should be located compared to bottom of the connector. I have few PCB's from Emil Sokolowski and few cases from Sunrise, but unfortunately they are not compatible.

The holes are not compatible with the eprom pcb's you have. The cartridge cases from Eric Boez are compatible.

Emil

By sd_snatcher

Prophet (3453)

sd_snatcher's picture

08-11-2015, 12:34

@NYYRIKKI

Are your PCBs from ReproFactory? Usually their ROM/Flash PCBs fit perfectly into the Patola Cases. I installed the 2048K Flash kit PCB into one of those and it worked like a charm.

By NYYRIKKI

Enlighted (5837)

NYYRIKKI's picture

08-11-2015, 13:31

roadfighter wrote:

The holes are not compatible with the eprom pcb's you have. The cartridge cases from Eric Boez are compatible.

Ok, was worth of try anyway. Smile I think in this case I'm gonna skip these cases.

sd_snatcher wrote:

@NYYRIKKI
Are your PCBs from ReproFactory?

No, I think roadfighter knows better where he made these.

By roadfighter

Champion (421)

roadfighter's picture

08-11-2015, 13:50

The Eprom boards / pcb's i made my self with a Konami cartridge as example.
The holes are 100% konami compatible.
So are the casings that the ReproFactory is selling.
I made some games in these cartridges with my own pcb's and it fits perfectly.

Emil

By sd_snatcher

Prophet (3453)

sd_snatcher's picture

08-11-2015, 13:57

The Patola cartridge cases are Konami compatible. Smile

The only restriction are the internal pillars for the screws. But most EPROM/Flash cartridges are narrow enough to fit between them.

The bigger PCBs of interface cards would need to have holes to get around the pillars though. For example, the HBI-232mkII wouldn't fit into the case because of that.

By Sinclair

Supporter (15)

Sinclair's picture

08-11-2015, 14:02

roadfighter wrote:

The Eprom boards / pcb's i made my self with a Konami cartridge as example.
The holes are 100% konami compatible.
So are the casings that the ReproFactory is selling.
I made some games in these cartridges with my own pcb's and it fits perfectly.

Emil

You mean this PCB design?

Page 3/5
1 | 2 | | 4 | 5