MSX USB

Page 11/11
4 | 5 | 6 | 7 | 8 | 9 | 10 |

By popolon_

Rookie (31)

popolon_'s picture

16-05-2020, 12:39

@S0urcerer, about this new CPLD design. What chips are compatible with you design? as there seems to be different variants from that EPM7064, so is only EPM7064SLC44-10N working one? That seems to be obsolete chip now, at least based on digikey.

By S0urceror

Expert (69)

S0urceror's picture

17-05-2020, 21:48

You need the 44 pin plcc version. You can find them on eBay or aliexpress for around 1,80 per piece. I got 5 for less then €10.

Although very versatile the world has moved on to bigger CPLDs and FPGAs. For this design this chip works well and is cheaper then discrete logic.

By nikodr

Paladin (740)

nikodr's picture

18-05-2020, 02:44

How can I order this? Seems interesting for me. I have been doing many arduino projects and would love to have something with USB msx and arduino. Smile

By popolon_

Rookie (31)

popolon_'s picture

18-05-2020, 14:02

@S0urcerer, there are for example EPM7064SLC44 with 7NS and 10NS, so it must be 10NS version? And you cannot use newer chip, for example EPM7064AETI44 ?

By S0urceror

Expert (69)

S0urceror's picture

22-05-2020, 23:27

@popolon_, no sorry not the newer one. The newer one runs on 3,3 v. And the MSX on 5V. You can of course use resistors on every line coming from/to cartridge. Better to use the old ones. 10ns is fast enough for our MSX.

By S0urceror

Expert (69)

S0urceror's picture

22-05-2020, 23:38

MSXUSB is updated to support:

  • Powered USB Hub devices. Even hub's behind hubs. Maximum 16 devices!
  • Updated drivers for Ethernet and Keyboard that discover in which port the device sits.
  • A MSX flash utility for the MSXUSB printed circuit board.
  • A working CPLD Verilog firmware with write-compatible SCC ROM Mapper and CH376s IO addressing.
  • RookieDrive, a special build is made so it runs on the RookieDrive. Thanks for Xavirompe testing it out!

By S0urceror

Expert (69)

S0urceror's picture

22-05-2020, 23:47

Forgot to add that LSUSB is also updated to list all devices connected to a hub.

Oh, and by the way, have you tried a PI Zero W with the USB ECM gadget? Easy way to have Wifi on the MSX!

Page 11/11
4 | 5 | 6 | 7 | 8 | 9 | 10 |