MSX USB

Page 17/17
10 | 11 | 12 | 13 | 14 | 15 | 16 |

By sdsnatcher73

Paladin (929)

sdsnatcher73's picture

29-06-2020, 10:11

xavirompe wrote:

The Rookie drive 720 was a prototype

Okay that clears up @sd_snatcher’s question.

By tingis53

Paragon (1069)

tingis53's picture

30-06-2020, 12:35

Hi S0urceror!
I'm very interested on añy project related to USB in MSX
I follow your project and as I own a Rookie Drive I would like to give it a try, so I decided to flash your con in my Rookie Drive. Unfortunately every time I flash either nextorrd.rom or rookie complete rom I downloaded from your GitHub I get
this error msg
MSXUSB Flash, (c) 2020 S0urceror

M: E5, D: CD
M: C2, D: A4
M: FF, D: FF
M: F0, D: 0
Found flash in slot : 1
Opened: nextorrd.rom
Filesize is 0 bytes
Erasing sector: 0
Erasing sector: 1
Press any key to continue
Reading 8192 bytes, segment 0
Reading 8192 bytes, segment 1
=> address: 0, value: D5, response: 37
Error writing byte: 0 in segment: 1
Am I doing somethin wrong , any idea of what the problem is?
Just tell you that, after the problem I reflash with Rookie Drive firmware without any incident.
Thanks!

By Pencioner

Scribe (1117)

Pencioner's picture

30-06-2020, 14:18

@tingis53
you should use the RKFL.COM - RookieDrive native tool to flash rom to the RD - because RD uses ASCII mapper while MSXUSB uses Konami mapper

By tingis53

Paragon (1069)

tingis53's picture

30-06-2020, 14:58

Interesting point
Other mapper drives to problems
Many thanks @Pencioner I'll try that way

By S0urceror

Expert (88)

S0urceror's picture

30-06-2020, 20:42

Yes Pencioner is correct. On the RookieDrive you use it’s own flash tool RKFL.com. On the MSXUSB cartridge that has a different mapper you use FLASH.com.

By tingis53

Paragon (1069)

tingis53's picture

30-06-2020, 21:25

Thanks anyway , now it works properly let see the evolution of the project.

By syn

Paragon (1963)

syn's picture

30-06-2020, 23:38

anyone know if the USB mapper by tecnobytes is compatible as well?

http://www.tecnobytes.com.br/2020/06/usb-mapper-new-batch-20...

By Pencioner

Scribe (1117)

Pencioner's picture

30-06-2020, 23:52

@syn it might be incompatible by other means. is the same chip being used by Tecnobytes? Arduino + ch376 i mean...

By Grauw

Ascended (9050)

Grauw's picture

01-07-2020, 00:03

That’s really cool that it works with RookieDrive NX! And I just read in a post on Xavirompe’s Twitter that XSWifi also gets USB support. I was already looking forward to it for the wi-fi, now I’m even more excited!

Page 17/17
10 | 11 | 12 | 13 | 14 | 15 | 16 |