Side slot adapter for Gotek emulator and floppy drives, usable in YIS503, CX5M, CX5MII and similar MSXs

Page 3/3
1 | 2 |

By gdx

Prophet (2976)

gdx's picture

03-02-2019, 13:53

Yamaha owners are lucky.

By Alexey

Guardian (2337)

Alexey's picture

03-02-2019, 16:24

I don't plan to produce it unless I get enough orders.

By Alexey

Guardian (2337)

Alexey's picture

08-04-2019, 12:51

Looks like all the devices that I assembled from the first batch are gone. Is there any demand for more to be produced?

By kiwimsx

Resident (40)

kiwimsx's picture

08-04-2019, 14:15

Good friend, I'm interested. I own a yamaha cx5 mII French version and cx7 128. Thank you for your great work. Smile

By Alexey

Guardian (2337)

Alexey's picture

08-04-2019, 15:49

Ok, if I get 8 more requests, I will make another batch.

By Alexey

Guardian (2337)

Alexey's picture

21-04-2019, 20:06

I added the 3D models of 2 holders that allow to fix the Gotek emulator inside the case. The holders are glued to the sides and the bottom of the case and then the holes are made in the sides of the case to insert the screws. With four 3.00 x 20.00mm screws the Gotek emulator is firmly attached to the case and you can pull out the entire module easily. See the pictures of the installed holders for more info.

By Alexey

Guardian (2337)

Alexey's picture

22-04-2019, 13:01

If someone needs these holders, please send me an e-mail. I can print them on-demand for a couple of euros.

By Alexey

Guardian (2337)

Alexey's picture

31-07-2019, 13:16

In September 2019 I will produce 5 more of those adapters. Three out of five are already reserved. If you need this adapter, please write me an e-mail. Also state whether you need the reprogrammed Gotek emulator with the adapter.

The price for the adapter is 70 Euro. The reprogrammed Gotek is 25 Euro. I can assemble the device if a buyer wants it. The shipment costs 7.50 Euro to any country (registered mail).

By kiwimsx

Resident (40)

kiwimsx's picture

31-07-2019, 14:33

Good afternoon friend Alexey, it is not clear to me if you can use your adapter for one more shot in the msx yamaya cx5mII / cx7. If so, can you use the gotek or just one of the two ways ?. If so, I would like to book one. Thank you for all your inventions Smile

By Alexey

Guardian (2337)

Alexey's picture

31-07-2019, 16:21

kiwimsx wrote:

Good afternoon friend Alexey, it is not clear to me if you can use your adapter for one more shot in the msx yamaya cx5mII / cx7. If so, can you use the gotek or just one of the two ways ?. If so, I would like to book one. Thank you for all your inventions Smile

No, this adapter does not create an additional slot. It's only for the Gotek floppy emulator or for external floppy drive. We have another adapter that creates the normal 50-pin MSX slot from the side slot of Yamahas:

https://github.com/RBSC/SideSlotCartridgeAdapter

But it's no longer in stock. The project is open-source, so anyone can make an adapter for himself.

Page 3/3
1 | 2 |