Sony MOS-1 mouse correct pinout

By QBee Sam

Master (150)

QBee Sam's picture

23-06-2018, 00:13

I own a Sony MOS-1 MSX mouse without DE9 conector, well... i got the DE9 but the wires are not solded... anyone knows the correct pinout? I think GND should be 4 pin looking 1st image from left to right... or not, I really need some help.

Login or register to post comments

By Philip

Champion (363)

Philip's picture

23-06-2018, 08:43

Funny, I have exactly the same mouse also with the cable cut off Smile
Luckily I have the cut off part as well.
So the pinout is like this:
1 - brown
2 - red
3 - orange
4 - yellow
5 - green
6 - blue
7 - grey
8 - white
9 - black

Here you can find the pinout

By QBee Sam

Master (150)

QBee Sam's picture

26-06-2018, 00:50

Thank you very much Philip, I finally take my mouse back to life!!!
Thank you too also Jipe, I've read some of these docs before but I was unable to understand how to connect the cut wires even with that info.

Philip wrote:

Funny, I have exactly the same mouse also with the cable cut off Smile
Luckily I have the cut off part as well.
So the pinout is like this:
1 - brown
2 - red
3 - orange
4 - yellow
5 - green
6 - blue
7 - grey
8 - white
9 - black

Here you can find the pinout

My MSX profile