Super turbo PCB layout

Page 11/13
4 | 5 | 6 | 7 | 8 | 9 | 10 | | 12 | 13

By jltursan

Prophet (2502)

jltursan's picture

05-05-2021, 21:14

7.3728Mhz is fine, you can try even with a slightly higher clock.

By SkalTura

Champion (323)

SkalTura's picture

06-05-2021, 15:16

Gregory wrote:

Can't seem to find that 7.16 MHZ value.
7.3728Mhz is the closest thing to it I can find.

Mouser.com: 449-LFXTAL012626BULK
Mouser also has the QFP Z80 by the way...: 692-Z84C0008AEG

By sdsnatcher73

Paragon (1859)

sdsnatcher73's picture

07-05-2021, 11:01

Checked online, can’t seem to find 1 place that has spare time in sufficient quantitiesWink

By Gregory

Master (145)

Gregory's picture

19-05-2021, 17:39

Look what the mail-lady dropped by:

photo

I'm still waiting for a few parts and then I will be able to turn the soldering iron on.

By sdsnatcher73

Paragon (1859)

sdsnatcher73's picture

19-05-2021, 18:33

So nice!!

By alexito

Paladin (730)

alexito's picture

19-05-2021, 20:15

@Gregory:
I like it. looking forward.

By jltursan

Prophet (2502)

jltursan's picture

19-05-2021, 21:32

Gregory wrote:

Look what the mail-lady dropped by:

photo

I'm still waiting for a few parts and then I will be able to turn the soldering iron on.

Hahaha, cool!

By SkalTura

Champion (323)

SkalTura's picture

21-05-2021, 09:23

Gregory wrote:

I'm still waiting for a few parts and then I will be able to turn the soldering iron on.

Awesome Gregory !
Cool

Do you need an image of the silkscreen only, so its a bit more clear what the components are named ?

By Gregory

Master (145)

Gregory's picture

21-05-2021, 13:43

SkalTura wrote:
Gregory wrote:

I'm still waiting for a few parts and then I will be able to turn the soldering iron on.

Awesome Gregory !
Cool

Do you need an image of the silkscreen only, so its a bit more clear what the components are named ?

Yes, that would be helpful.

By SkalTura

Champion (323)

SkalTura's picture

21-05-2021, 14:00

I will upload them this evening (not at home at the moment).
Or if you give my your email in a PM, I can send them to you now...

Page 11/13
4 | 5 | 6 | 7 | 8 | 9 | 10 | | 12 | 13