Talent DPC-200 Power Supply Failure

Page 6/6
1 | 2 | 3 | 4 | 5 |

By Wild_Penguin

Hero (590)

Wild_Penguin's picture

16-01-2020, 08:54

rderooy: Yes, I agree these should be listed. Now the information in Wiki is incomplete. I guess somewhat few people use expansion ports (they were more common in MSX1s, and most heavy users with more expansions have at least an MSX2). That's probably why this has been overlooked... after all, it is quite laborsome (but OTOH also quite trivial) to check the pinouts. We can make assumptions such as: 1) are only two, "mirrored" pinouts (as I've done); 2) there are four mirroring + accounting keying), but these are only assumptions... maybe some manufacturer just wanted to be more different for no sensible reason LOL!

By rderooy

Paladin (682)

rderooy's picture

16-01-2020, 11:36

I have made some adjustments to the Wiki page, have a look. I suspect the Goldstar manufactured systems also follow the "normal" pin-out, but I could not find a user or service manual with the pinout.

By Wild_Penguin

Hero (590)

Wild_Penguin's picture

16-01-2020, 15:32

Looking good! Cool

By tsMKG

Resident (48)

tsMKG's picture

16-01-2020, 20:39

I'm sorry about the confusion about "horizontal/vertical flipping".

With "vertical flipping" I meant the odd/even pin swap while with "horizontal flipping" I meant that the later pins get swapped with the former pins (1 with 49, 2 with 50, 3 with 47, 4 with 48, and so on…)

I hope I made things clearer Tongue

Page 6/6
1 | 2 | 3 | 4 | 5 |