Victor Trucco announced MSX-SM

Page 8/11
1 | 2 | 3 | 4 | 5 | 6 | 7 | | 9 | 10 | 11

By OeiOeiVogeltje

Paragon (1307)

OeiOeiVogeltje's picture

30-06-2019, 21:20

i did not get any PM's
so i ordered one

By ducasp

Master (151)

ducasp's picture

30-06-2019, 21:42

You always have to remember that by declaring a lower value, in case it is lost or damaged before delivery, you will be reimbursed only the declared value. It is always a two (or three or four) edge sword.

By OeiOeiVogeltje

Paragon (1307)

OeiOeiVogeltje's picture

30-06-2019, 21:56

have you ever had a package reimbursed ?
ever?

By hamlet

Scribe (2526)

hamlet's picture

30-06-2019, 22:29

Oei, that's a good argument!
I argued so often with delivery companies about broken packages, but it was always my fault. Also for lost deliveries.

By OeiOeiVogeltje

Paragon (1307)

OeiOeiVogeltje's picture

30-06-2019, 22:43

i actually do logistics for work
stuff that gets sent far away is ALWAYS worth about 10 US dollars according to invoice..
ALWAYS

By KdL

Paragon (1226)

KdL's picture

07-07-2019, 11:38

Grauw wrote:

What about moving the disk ROM from slot 3-2 to 0-1? I think having a disk ROM in slot 0 is also a fairly common thing, so that should work without issues...?

I have just tested MEGASDHC and NEXTOR kernel on Slot 0-1 and unfortunately the system crashes at startup.

By Grauw

Ascended (8439)

Grauw's picture

07-07-2019, 11:34

I see, that’s a shame…

By KdL

Paragon (1226)

KdL's picture

07-07-2019, 12:11

A probable solution could be to restore XBASIC2 on slot 0-1 and free up slot 3-3 but I cannot confirm it without trying the new pcb, there is also the IPL-ROM in slot 3-3. The XBASIC2 had already been moved to slot 3-3 from 0-1 due to compatibility issues with some games if used on slot 0-1.

https://twitter.com/ocm_pld_news/status/916270988182065153

By KdL

Paragon (1226)

KdL's picture

07-07-2019, 12:28

Damn! I've just seen an error in the source code, I'm going to redo the test. Here is the correct code:

    iSltErm     <=  mem when( (w_prislt_dec(0) and w_expslt0_dec(1) and (w_page_dec(1) or w_page_dec(2))) = '1' and Slot0Mode = '1'     )else   -- 0-1 (4000-BFFFh)   128 kB  (MEGASDHC.ROM + FILL64KB.ROM) or NEXTOR16.ROM
                    mem when( (w_prislt_dec(3) and w_expslt3_dec(2) and (w_page_dec(1) or w_page_dec(2))) = '1' and Slot0Mode = '0'     )else   -- 3-2 (4000-BFFFh)   128 kB  (MEGASDHC.ROM + FILL64KB.ROM) or NEXTOR16.ROM
                    '0';

By KdL

Paragon (1226)

KdL's picture

07-07-2019, 12:48

Unfortunately, I confirm that the MEGASDHC does not work on slot 0-1 in any case.

Page 8/11
1 | 2 | 3 | 4 | 5 | 6 | 7 | | 9 | 10 | 11