Yamaha side slot cartridge adapter - any interest?

Page 1/3
| 2 | 3

By Alexey

Guardian (1930)

Alexey's picture

04-03-2019, 00:19

Is there any interest in the Yamaha side slot cartridge adapter project? The adapter comes with a 3d-printed case and should look like that:

Internally there will be 2 boards and 50 pin ribbon cable between them, nothing else.

Login or register to post comments

By alexito

Champion (324)

alexito's picture

04-03-2019, 01:00

I'm in just for the PCB and the extension connector I think the case is not necessary for me because I wanna try to connect MSX cartridges like the FS-CA1 or FS-UV1

Wink

PS: how long the extension cable can be?

By max_iwamoto

Champion (412)

max_iwamoto's picture

04-03-2019, 00:54

I would like at least 2 of them, complete with case.

By alexito

Champion (324)

alexito's picture

04-03-2019, 01:07

This is just one reason why I want to buy the cartridge adapter.

picture

By sd_snatcher

Prophet (2916)

sd_snatcher's picture

04-03-2019, 14:16

How much will it cost?

By NYYRIKKI

Enlighted (5173)

NYYRIKKI's picture

04-03-2019, 15:00

Yes

By Alexey

Guardian (1930)

Alexey's picture

04-03-2019, 15:36

If I make the batch of 10, then the cost will be around 35-40 Euro for the complete adapter.

By MSX4ever

Master (167)

MSX4ever's picture

04-03-2019, 15:37

I would like one too

By Grauw

Enlighted (7842)

Grauw's picture

04-03-2019, 15:39

Also interested in one.

By sdsnatcher73

Champion (284)

sdsnatcher73's picture

04-03-2019, 16:13

Me too!

By Alexey

Guardian (1930)

Alexey's picture

05-03-2019, 03:18

Ok, boards' design is ready, the 3D model has been adjusted a bit.

Now printing the case...

Page 1/3
| 2 | 3
My MSX profile