Yet another MSX Mouse

By Lhanthian

Resident (33)

Lhanthian's picture

24-11-2019, 16:31

Here is another MSX Mouse based on Mitsumi Serial Mouse case.

Board (up):

Board (bottom):
https://i.postimg.cc/1trSJstt/image.jpg
3D Model (up side):
https://i.postimg.cc/MpgzG9NW/Model-dn.png
3D Model (bottom side):
https://i.postimg.cc/rpWMRS25/Model-up.png

Login or register to post comments

By Danjovic

Master (144)

Danjovic's picture

01-12-2019, 23:44

Awesome!! Congratulations!

By Manuel

Ascended (16700)

Manuel's picture

02-12-2019, 00:08

Cool, you made it yourself??

By gdx

Prophet (3571)

gdx's picture

02-12-2019, 01:18

The cable does not look well fixed.

By Alexey

Guardian (2795)

Alexey's picture

02-12-2019, 10:06

The black part of the cable needs to go deeper into the mouse and needs to be twisted to the right in the cable channel.

By Lhanthian

Resident (33)

Lhanthian's picture

02-12-2019, 18:41

This is simple AT2313 + LM339 solution, based on original "Philips SBC 3810" schematic. PCB was ordered at OSHPARK . More explanations (schematic, program source, etc) can be given in Russian section (if someone will be interested in it).

By Danjovic

Master (144)

Danjovic's picture

03-12-2019, 01:45

Lhanthian wrote:

....More explanations (schematic, program source, etc) can be given in Russian section (if someone will be interested in it).

Yes, please!

By Lhanthian

Resident (33)

Lhanthian's picture

06-12-2019, 11:50

Here is a little more in Russian.

By Danjovic

Master (144)

Danjovic's picture

06-12-2019, 23:39

Lhanthian wrote:

Here is a little more in Russian.

Thanks! I have read it with through automatic translator. Very useful information.