Zemmix Neo project in Korea. (OCM based Zemmix with CNCed case)

Page 53/59
46 | 47 | 48 | 49 | 50 | 51 | 52 | | 54 | 55 | 56 | 57 | 58

By luppie

Paladin (795)

luppie's picture

21-09-2013, 18:02

Today I've 'modded' my Zemmix Neo.
I loved the picture of the special edition with the extra lights, so I've added the to my Neo.

I used a piece of perspex plastic to add an extra layer that lights up using 2 RGB Led's Big smile

Movie of my Neo in action.

By KdL

Paragon (1060)

KdL's picture

21-09-2013, 23:59

LOL! Smile

By MSX4ever

Master (131)

MSX4ever's picture

22-09-2013, 15:00

really nice and professional.

By mygodess

Master (226)

mygodess's picture

23-09-2013, 06:37

@luppie
Looks good Smile I think you may add a little plastic on bottom of switch also Smile

By luppie

Paladin (795)

luppie's picture

23-09-2013, 11:32

Thank you mygodess.
What do you mean with the bottem of the switch?

I also looked if I could make it also on the bottem of the Neo, but this is a bit harder to acomplished, because of the sides of the Neo are mounted on the bottemplate.

By mygodess

Master (226)

mygodess's picture

23-09-2013, 17:40

I meant just the switch itself. There must be 2-3mm (height of Transparent Plastic) space from
upper cover switch to PCB switch because you added plastic between upper cover and middle cover.
Anyways, did you got the present? I hope you like it Smile

By luppie

Paladin (795)

luppie's picture

23-09-2013, 17:50

Ohh ok, that was no problem, the original switches are still working withou adding some extra hight to them.
I received your present, still have to unpack it Wink

By spl

Paragon (1450)

spl's picture

03-10-2013, 16:08

Does the new Firmware have the Zemmix logo boot?

By mygodess

Master (226)

mygodess's picture

04-10-2013, 02:36

@spl.
This is the 3.2rc5 firmware with Zemmix Neo Logo.
3.2RC5 with Logo

By MSX4ever

Master (131)

MSX4ever's picture

04-10-2013, 19:42

@mygodess
I have flash it, but still the MSX Logo ?

Regards,
MSX4ever

Page 53/59
46 | 47 | 48 | 49 | 50 | 51 | 52 | | 54 | 55 | 56 | 57 | 58
My MSX profile