8bits4ever SD512 and Panasonic fs-a1

By Justeungeek

Supporter (1)

Justeungeek's picture

05-04-2019, 00:54

Hi everyone,

I'm a newbie at the MSX scene, got interested in this when I watched the Game Sack episode on it.
I recently purchased a Panasonic fs-a1 and an 8bits4ever SD512.

Now the SD card is formatted to FAT16 and even shows up in the boot when I start the system with the cart in it. However, it doesn't boot further and goes straight to the basic option screen for the system.

From there, I'm a loss. I tried going into basic mode, which brings me to Nextor, but thats it. I have no clue what I'm doing wrong and any video I can find on the subject just shows the system booting straight to the files menu of the roms contained on the SD card.

Anyone can help me?

Login or register to post comments

By Pentarou

Master (202)

Pentarou's picture

05-04-2019, 06:30

I though these came from the shop with an SD-Card with pre-installed tools, but they didn't even give you a manual?
Anyway, Read this thread.

By BlackmanRobotics

Supporter (3)

BlackmanRobotics's picture

28-05-2019, 10:35

Hi,
I have the same cartridge, in my case it´s working. It boot´s directly into sofarun.
i just mounted the Nextor Image MSXNEXTOR.RAR and copied the content to a 4gb FAT16 formatted SD-Card.
In my case (VG 8010) i had to set both switches to the right side, to have the full 512Kb RAM.

Cheers