One chip MSX improvement project | MSX Resource Center (Page 81/118)

Resident (63)

26-02-2014, 08:40

caro wrote:

Is possible to add to tape connection a remote (motor on / motor off) to start and stop play tape?Well, the next version of firmware will add a relay control output of the taper.

Hi caro, I'm designing your interface for my DE0 with eagle. I'm willing to connect my old SVI tape recorder (I'm going to add a standard 8 pin DIN to the board), but I need all the motor stuff to provide full functionality, is this implemented already? I cannot see anything in your diagram, but maybe it can be outdated?

Also I'm in doubt with the 12V pins, I will connect only Konami cartridges, I assume it is ok to leave it unconnected, is that safe?

Thank you.

By x-nen Aivalahostia

Paragon (1473)

22-05-2014, 11:41

Hello!!!

I'm working to produce a PBC for a DE1 and DE0 , you can see a pictures of the firsts prototype al custommsx.com.

Thanks

By AxelStone

Prophet (3093)

22-05-2014, 13:38

x-nen Aivalahostia wrote:

Hello!!!

I'm working to produce a PBC for a DE1 and DE0 , you can see a pictures of the firsts prototype al custommsx.com.

Thanks

Very nice work! Please keep us updated

P.D.: lo pongo en inglés pero por tu nick intuyo que eres más español que el jamón

By thezorry

Resident (63)

28-05-2014, 15:48

Nice! Please keep up the good work. ¿Can we order you a board?

By x-nen Aivalahostia

Paragon (1473)

28-05-2014, 17:40

@thezorry, It is only a prototypes, We are working to get a quality and bug free PBC for DE0 and DE1 fpga boards, when we have a good designed PBC we try to make a little production and you will order a board.
We will show fist prototypes working at Msx meeting in Barcelona next Saturday 28th of June.

By KdL

Paragon (1430)