One chip MSX improvement project

Page 84/118
77 | 78 | 79 | 80 | 81 | 82 | 83 | | 85 | 86 | 87 | 88 | 89

By KdL

Paragon (1415)

KdL's picture

09-10-2014, 03:59

a BIOS mod will be release very soon Wink I'm already in testing...

By KdL

Paragon (1415)

KdL's picture

09-10-2014, 05:17

SDBIOS v1.6 Preview --> removed the phantom drive B: --> CTRL forever enabled

I'll wait a test or suggestions from anyone, thx! :)

By MIST

Supporter (5)

MIST's picture

09-10-2014, 09:25

Alastairs port now also runs on the MIST board:
https://www.youtube.com/watch?v=wuJGqrItLts

This uses internally some stubs for the sd card, keyboard, mouse and joystick. This has the advantage that this even partly works with SDHC cards. It also supports USB joysticks and joypads and wireless usb keyboard/mouse combo devices.

More details about the board at https://code.google.com/p/mist-b

By pmt7ar

Supporter (9)

pmt7ar's picture

09-10-2014, 19:11

KdL SDBIOS working good, thanks!

Now something unrelated, War of the Dead 2 is playable but it has an ugly vglitch on the map area. Any ideas if this is OCM specific? It works fine on my FS-A1WSX. http://imgur.com/niK17Cb http://imgur.com/0gIY3Zr

By KdL

Paragon (1415)

KdL's picture

09-10-2014, 23:54

there is the same problem @3.58MHz? ...at any rate, the vdp is not yet completed.

By KdL

Paragon (1415)

KdL's picture

10-10-2014, 18:41

-- 
--------------------------------------------------------------------------------
-- 1chipMSX & Zemmix Neo SD-Card BIOS / OCM-SDBIOS Pack v1.6 by KdL (2014.10.10)
--------------------------------------------------------------------------------
-- Eastern Yen/Backslash and Western Edition for OCM-PLD Pack v3.0 or later.
-- MSX3 Logo Final Release and MegaSD Single Drive Fix (CTRL forever at boot).
-- Special thanks to caro for helping me with the system logo.
--------------------------------------------------------------------------------
--

http://www.webalice.it/gnogni/
http://gnogni.altervista.org/

By MIST

Supporter (5)

MIST's picture

11-10-2014, 17:00

I am a noob when it comes to msx. Does that mean that sdhc and fat32 support is possible?

By KdL

Paragon (1415)

KdL's picture

11-10-2014, 19:27

You can try to convert this: OpenCores SDCARD Controller

I don't know any FAT32 support for MSX.

By spl

Paragon (1470)

spl's picture

13-10-2014, 15:04

Will the problem with external video cards like Playsoniq be solved soon? Sad Remember that in versions <=2.3 this hardware worked like a charm...

Regards,

Salva

By KdL

Paragon (1415)

KdL's picture

13-10-2014, 18:54

it's the next in the queue...

Page 84/118
77 | 78 | 79 | 80 | 81 | 82 | 83 | | 85 | 86 | 87 | 88 | 89