Custom Games for JOYSNES

Page 3/4
1 | 2 | | 4

By Popolon_fr

Rookie (19)

Popolon_fr's picture

15-09-2017, 00:26

Quote:

They'll be picked up really soon. Thanks for the patience Smile

Here you go. Thanks for making and uploading them.

Thank you so much. Wink

Yet another patch to play The Treasure Of USAS with the extra buttons of the JoySnes.

download here

Good fun !

By Meits

Scribe (4477)

Meits's picture

15-09-2017, 01:36

Thanks for submitting that one as well. I added it to the newspost.

By Popolon_fr

Rookie (19)

Popolon_fr's picture

18-09-2017, 20:46

New patch to play King's Valley II with the extra buttons of the JoySnes:

download here

have fun ! B-)

By Bastiaan

Champion (328)

Bastiaan's picture

19-09-2017, 20:55

are these patches compatible with the joymega adapter? See for instance:
https://www.msx.org/forum/msx-talk/hardware/joymega-adapter-...

Or do we need different patches for joymega and joysnes?

By gdx

Paragon (1606)

gdx's picture

20-09-2017, 00:03

JoySNES and JoyMega use different protocol. JoySNES is a bit more advanced.
Use Sofarom to apply patches for the joymega adapter. I think JoyMega is mainly dependent on Sofarom to be usable normally on MSX.

By Grauw

Enlighted (6180)

Grauw's picture

20-09-2017, 00:07

JoyMega works fine without patching, patching is only needed when you want to use the extra buttons for menu functions etc.

By gdx

Paragon (1606)

gdx's picture

20-09-2017, 00:16

Do the buttons A and B match well without patch?

By ListoMefisto

Master (202)

ListoMefisto's picture

22-09-2017, 19:22

Could you do some patches for Nemesis, Nemesis 2, Salamander, Nemesis 3 and Parodius, please? It would be great to be able to play those games and if you need to pause the game or continue, use those keys on the SNES pad Smile

By Louthrax

Paragon (1643)

Louthrax's picture

22-09-2017, 21:52

Some answers about JoyMega: the A and B button are working well without patches (behaving like a normal 2 buttons pad). Access to other buttons do indeed require patching. SofaROM is doing that by mapping joypad buttons to the keyboard keys (that can be configured in the SROM.INI file). Same thing could be done for JoySNES (I have a JoySNES here, just need some time to add it to SofaROM!).

By Popolon_fr

Rookie (19)

Popolon_fr's picture

26-09-2017, 21:14

Quote:

Could you do some patches for Nemesis, Nemesis 2, Salamander, Nemesis 3 and Parodius, please?

Yes it's possible. However, you may have to wait for a version of Srom that supports JoySnes, as Louthrax proposes.

Quote:

Same thing could be done for JoySNES (I have a JoySNES here, just need some time to add it to SofaROM!).

Yes it would be very good. For games that do not require more than two buttons to assign the F1 (PAUSE) button to the START button, and another button on the SELECT button, simply use the FM-TOWN controller compatibility. Simply test RIGHT + LEFT to get the START, and HIGH + LOW to have the SELECT. If one of these two keys is pressed, the four bits of the direction must be reset to zero so as to avoid undesirable movement. So you will keep compatibility with FM-TOWN controllers, without sacrificing the JoySnes autofire with games like Gradius. If possible, add two options with SROM, one for the FM-TOWN controller and the other for using the eight buttons of the JoySnes.

For some games it is necessary to change directly in the program to replace a combinations by an individual button. This is the case of Vampire Killer for this new patch. Now you can use the L and R buttons to launch holy water and X to use the hourglass. The texts have been adapted to be consistent with these new buttons.

download here

Next... B-)

Page 3/4
1 | 2 | | 4
My MSX profile