Salamander Smooth Scroll IPS Patch

Page 6/6
1 | 2 | 3 | 4 | 5 |

By TheKid

Paladin (671)

TheKid's picture

24-11-2016, 07:39

"... my first child was born ...",
Congratulations Manuel!

By meckert

Rookie (18)

meckert's picture

24-11-2016, 11:29

Manuel wrote:

What is the mapper type you are using on that cartridge?

I think it autodetects as Konami 8k mapper.

The non-patched version works correctly.

By Victor

Champion (389)

Victor's picture

24-11-2016, 13:29

meckert wrote:
Manuel wrote:

What is the mapper type you are using on that cartridge?

I think it autodetects as Konami 8k mapper.

The non-patched version works correctly.

Try to force SCC mapper.

By Manuel

Ascended (14468)

Manuel's picture

24-11-2016, 20:40

TheKid: he's 5 years old now Smile Better late than never, I guess Tongue

By TheKid

Paladin (671)

TheKid's picture

25-11-2016, 07:25

Whoops, I thought I missed something but apperently 5 years ago I did Smile

By mtini

Expert (93)

mtini's picture

23-04-2018, 04:09

I tried running on the MSX Turbo R A1 GT but the game crashes after giving the Start.

I tried to run with SofaRun and ExecRom. In Slot B I put an SCC cartridge (SD Snatcher).

My hardware:

MSX Turbo R A1GT
SD Mapper / Megaram 512kB
SCC SD-Snatcher

Can anyone help me with this issue?

By sdsnatcher73

Master (152)

sdsnatcher73's picture

23-04-2018, 21:05

mtini wrote:

I tried running on the MSX Turbo R A1 GT but the game crashes after giving the Start.

I tried to run with SofaRun and ExecRom. In Slot B I put an SCC cartridge (SD Snatcher).

My hardware:

MSX Turbo R A1GT
SD Mapper / Megaram 512kB
SCC SD-Snatcher

Can anyone help me with this issue?

It may be as simple as the rom file you used was not a clean/good dump. Try the patch on an alternate rom file and see if that goes through after starting the game (had this last week with the Nemesis 3 patch). You can also check the patched rom in an emulator to see if it works there, or shows the same error.

By mtini

Expert (93)

mtini's picture

24-04-2018, 03:16

I tested it on blueMSX and it worked. In real MSX did not work.

By gdx

Prophet (2156)

gdx's picture

24-04-2018, 09:38

You must insert your SCC+ cartridge in slot 1.
BlueMSX does not emulate the SCC correctly. If you reverse the cartridges, voices will be played while this is not the case on a real Turbo R.
Salamander (also Nemesis 3) works fine with a Megasram SCC containing the game in slot 2 and the second SCC (an SCC+ in our case) in slot 1 on FS-A1ST. It should work too on the FS-A1GT.

By mtini

Expert (93)

mtini's picture

27-04-2018, 19:30

I tested both slot 0 and slot 1 and the same problem occurs. The game crashes early on. I also tested on my 2+ WSX and the same problem occurs, ie it does not work.
In the blueMSX emulator it works, not the real MSX.

Page 6/6
1 | 2 | 3 | 4 | 5 |
My MSX profile