Synthesix

Page 6/8
1 | 2 | 3 | 4 | 5 | | 7 | 8

By roadfighter

Champion (395)

roadfighter's picture

06-03-2015, 21:04

Ha, great.
Thanks for adding the new version of the instructions.

By Grauw

Ascended (8516)

Grauw's picture

19-07-2015, 00:50

A small bugfix release 0.2.1:

  • Fixed crash when Yamaha SFG is in the same slot as the main RAM.
  • Fixed speed meter sometimes showing an incorrect value.

https://bitbucket.org/grauw/synthesix
https://bitbucket.org/grauw/synthesix/downloads

Not much else to report… I’m keeping myself busy with VGMPlay at the moment.

By -Neo-

Champion (380)

-Neo-'s picture

13-01-2016, 19:03

Hi,

I installed Synthesix and got it working although limited I think. I play a KV2 MIDI on my Mac and I do hear some channels (I think). As MIDI contains 16 channels and it seems we have 4 SCC channels in Synthesix, how can I remap MIDI channels to SCC?

Also, when additional sound chips will be supported in the future, will we then be able to hear all 16 channels? Is the plan to support General MIDI in the future?

By Grauw

Ascended (8516)

Grauw's picture

14-01-2016, 18:21

Hi Neo,

Have you tried to play all notes on channel 1? In the code it supports multiple channels, but the default (currently fixed) patch configuration which I set up only listens to the first. Note that channels are polyphonic.

In the future I do want to give the user control over which MIDI channels and note ranges a patch listens to, but it’s not implemented yet. You would also be able to have multiple patches loaded which control any number of sound chips per patch so they can be combined and layered, or separated.

I have no plans to support general MIDI, although I do want to support program switching so someone could make a sound bank for it eventually.

By -Neo-

Champion (380)

-Neo-'s picture

14-01-2016, 19:40

I am not sure how to play all notes on channel 1. You mean sending it all from the Mac to channel 1? My player cant handle that. If you mean in Synthesix, how can I do that?

By Grauw

Ascended (8516)

Grauw's picture

14-01-2016, 20:08

On the Mac. A DAW should be able to do it, e.g. Reaper.

By -Neo-

Champion (380)

-Neo-'s picture

14-01-2016, 20:37

Thanks Grauw. I'll take a look at it.

By Wlcracks

Champion (326)

Wlcracks's picture

27-04-2017, 13:07

Hello Grauw,

I want to run your Synthesix program, but i cannot download the rom file synthe6.rom on bitbucket https://bitbucket.org/grauw/synthesix/downloads/

What am i doing wrong?

Thanks

"Oops! We couldn't find synthe6.rom. You can give it another try in a few minutes or tell a repository administrator. "

By Grauw

Ascended (8516)

Grauw's picture

27-04-2017, 20:16

Hey Wlcracks, I don’t know what’s going on there, but download the synthesix-0.2.1.zip archive, the .rom file at the bottom is old, I’ve only been keeping it around to keep the downloads count.

By Wlcracks

Champion (326)

Wlcracks's picture

27-04-2017, 21:14

Thank you very much!

Page 6/8
1 | 2 | 3 | 4 | 5 | | 7 | 8