Checking interest for DalSoRi OPL4 board

Page 1/13
| 2 | 3 | 4 | 5 | 6

By Retrofan

Paragon (1214)

Retrofan's picture

06-06-2014, 19:06

Hi guys,

Are there people who are interested in the konami case sized DalSoRi OPL4 board from Korea?
I might be able to get some assembled boards over here if enough people are interested.
The DalSoRi will have 1024kB sampleRAM and is fully compatible with MoonSound.
I also have one right now and it works like a charm.
Additional you can choose if you want an Overrich casing.
Final prices will be announced when enough people are interested and if there are enough OPL4 chips available by then, but it will be approx. around 150 USD a piece and 10 USD for the casing. I will act as distributor. Shippingcost to me from Korea will be paid one time for all boards, so should be cheaper.
If you want a casing for the OPL4 board, you will have to make a hole for the connector by yourself. This is not part of the service.
Sent me your email and I will put you on the list: retrofan1979 at hotmail dot com
No need for paying right now, but as soon as everything is clear.

Login or register to post comments

By Grauw

Enlighted (8015)

Grauw's picture

06-06-2014, 20:54

Does the casing have a label?

It’s got better sound quality than the MoonSound, right? Considering it, I also like the small form factor…

By TheSpecialist

Expert (113)

TheSpecialist's picture

06-06-2014, 22:04

I'm only interested in 4MB MoonSound.

By syn

Paragon (1910)

syn's picture

06-06-2014, 23:18

expressing interest

By Retrofan

Paragon (1214)

Retrofan's picture

07-06-2014, 10:54

Grauw wrote:

Does the casing have a label?

It’s got better sound quality than the MoonSound, right? Considering it, I also like the small form factor…

No, the casing has no label, so that's why I choose the transparent case from Overrich. Very cool, as it then looks the same as the OCM Cool According to the manufacturer it has a better DAC, but I cannot compare as I only have the DalSoRi. And yes, the small form factor is very cool. It's the smallest OPL4 board around. Wink
Shall I put you on the list?

By Retrofan

Paragon (1214)

Retrofan's picture

07-06-2014, 10:54

syn wrote:

expressing interest

I put you on the list.

By Retrofan

Paragon (1214)

Retrofan's picture

07-06-2014, 11:04

TheSpecialist wrote:

I'm only interested in 4MB MoonSound.

Expensive and not very useable on MSX. The 1MB is in line with the existing MoonSounds, OPL4 Shockwaves and WozBlasters.

By Retrofan

Paragon (1214)

Retrofan's picture

07-06-2014, 11:15

When at least 10 people are interested it could be reality...
Right now 2 people are interested.

By msd

Paragon (1372)

msd's picture

07-06-2014, 12:20

4MBNot very usable, by which critirea ? There are already some people with more than 1MB on their Moonsound

By Grauw

Enlighted (8015)

Grauw's picture

07-06-2014, 12:21

Ok, put me on the list.

By Retrofan

Paragon (1214)

Retrofan's picture

07-06-2014, 14:26

msd wrote:

4MBNot very usable, by which critirea ? There are already some people with more than 1MB on their Moonsound

Which software/game does use it? ;-) Most people have 1MB or less. 4 MB is more a gadget...

Page 1/13
| 2 | 3 | 4 | 5 | 6