[WTS] Zemmix FPGA MSX (with 3D casing/monitor/keyb/accessories)

By stompetower

Expert (90)

stompetower's picture

02-05-2019, 12:35

Includes:
- Zemmix FPGA MSX including 3D printed casing
(rarely used, bought from '8bits4ever dot net' in 2018)
- HP Pavilion f1723 (with speakers & volume control)
- Logitech Internet 350 Keyboard (PS/2 connector)
- VGA cable to monitor
- Audio cable to monitor (RCA to jack)
- Power cord for monitor
- 5V Power supply Zemmix MSX
- SD Card 4GB (ScanDisk UltraII SDHC) for Zemmix MSX
- Altera USB Blaster

See ad on Dutch 'Marktplaats' for pictures and details:
https://link.marktplaats.nl/m1406604415

For 250 euro (ex shipping) I want to sell immediately. Otherwise, I'll wait some days/weeks before a good offer is made. Shipping from the Netherlands to Europe (preferably to the Netherlands).

Please use 'Marktplaats' or contact me through my profile if you are interested.

DETAILS Zemmix FPGA MSX / MSX-2 / MSX-2+
Stand-alone MSX computer FPGA based. Compatible with Korean Zemmix Neo firmware.

PRODUCT INFO
The Zemmix Neo is a FPGA based computer compatible 100% with the MSX2+ standard. It features VGA/RGB/S-Video/Composite video output, stereo RCA audio output, PS/2 keyboard input, 2 DB9 joystick ports, 2 USB ports, SD card slot and 2 cartridge slots.
Internally, the Zemmix also features SCC+ sound, FM sound, 2 or 4 MB RAM mapper, and turbo mode (5,37mhz/8,06mhz). The two cartridge slots allow the use of any MSX compatible cartridges. Also each slot can be configured as internal MegaSCC+.
You can connect any PS/2 keyboard (or USB keyboard if implement PS/2 protocol through USB) and MSX compatible joysticks (DB9). The unit also includes a SD slot that can be used as mass storage device through BASIC or MSXDOS command line.

Attention! 3D printed cases might show imperfections.

TECH SPECS
-Altera Cyclone EP1C12Q240C8N FPGA chip
-32 MB SDRAM
-Compatible with KdL Firmwares
-MSX2+ Standard Compatible
-Turbo 5.37 or 8.06 MHz
-Switchable 2/4 MB RAM Mapper
-MSX-MUSIC Compatible (FMPAC)
-1 MB ESE-MegaRAM
-1 MB ESE-RAM SCC+
-2 External Cartridge Slots
-SD Card Slot for Mass Storage (SD card FAT16 formatted)
-RGB/VGA 15/31KHz Video Output (50/60Hz)
-NTSC 60hz Composite and S-Video Output
-PS/2 and USB Keyboard Connection
-2 DB9 Joystick Ports (MSX compatible)
-RCA Stereo Audio Output
-Selectable Tape Input Mode

5v Power Supply
Power supply unit suitable for ZX-UNO M, Zemmix FPFA and STmini. EU plug (220v AC), regular DC jack DC 5.5x2.1x2.5 mm, center positive. Output:5v DC 2000mA .

Altera USB Blaster
Altera USB Blaster suitable for Carnivore2 and Zemmix FPGA firmware programming/recovery.

Note:
- Newest KdL firmware installed (version 3.7)
- Altera USB blaster not needed to upgrade firmware (used for recovery)

Login or register to post comments

By stompetower

Expert (90)

stompetower's picture

08-05-2019, 20:33

sold