Video issue on a Zemmix Neo (& some questions)

Par spastixx

Supporter (2)

Portrait de spastixx

08-04-2019, 04:12

First off, sorry if this is a bit obvious but it's pretty hard finding good collection of information for it. Sad

Few things: I recently started using my (8bits4ever) Zemmix Neo after having it so long and noticed connecting it to my LED monitor produced a very dark image with jagged lines moving through it and a black bar to the left. I tried it then on my TV but the image was still dark and was also a lot smaller and surrounded by dark borders. Not really an improvement. (I did check the dip switch manual included with the KdL pack and have them set for the right display.)

Another thing I noticed is that while the original manual for the Korean Zemmix Neo mentions it does not support Turbo-R, I saw a video of the Brazilian model running in a supposed "hybrid MSX Tubro-R mode" (https://www.youtube.com/watch?v=rcGH1gp0tiE) and I'm wondering if this is included in the KdL pack? Because I notice they switch between two SD cards before the (I'm assuming) Turbo-R game runs better (certain graphics failed to fully load at first, etc.).

Also they have two cartridges inserted so I'm guessing I might need a flashcart for Turbo-R games? Or can I run them from the SD card?

Thank you in advance for any help. :)

!login ou Inscrivez-vous pour poster

Par Sebbeug

Master (226)

Portrait de Sebbeug

08-04-2019, 08:44

Hello,

To run Turbo-R applications with your Zemmix Neo, you have to install ocm-sd bios on your SD card.
You can find this bios on KdL's website.
But actually, games are too slow to be funny played.

Stay tuned, the next KdL releases will be very nice.

Par Pencioner

Paladin (930)

Portrait de Pencioner

08-04-2019, 11:22

if yours Zemmix wa not used for long, you might have it from the same batch as mine, which has some issues with video output. i have sent my unit to 8bits4ever while ago and they fixed it

Par hamlet

Scribe (2461)

Portrait de hamlet

08-04-2019, 11:40

Quote:
Quote:

Stay tuned, the next KdL releases will be very nice.

Good news!

Par spastixx

Supporter (2)

Portrait de spastixx

08-04-2019, 15:48

Sebbeug wrote:

Hello,

To run Turbo-R applications with your Zemmix Neo, you have to install ocm-sd bios on your SD card.
You can find this bios on KdL's website.
But actually, games are too slow to be funny played.

Stay tuned, the next KdL releases will be very nice.

Oh, sweet, I'll keep an eye out! Wink

Pencioner wrote:

if yours Zemmix wa not used for long, you might have it from the same batch as mine, which has some issues with video output. i have sent my unit to 8bits4ever while ago and they fixed it

I see, well, I sent them an email. Let's hope they're still doing replacements. Crying