F1 Floppy Disk Emulator

F1 Floppy Disk Emulator

par hamlet on 16-09-2019, 13:23
Sujet: Hardware
Langues:

The Spanish hardware forge 8bits4ever surprises with another new piece of hardware.

The F1 is basically a Gotek floppy disk emulator clone. It's fully compatible with all the firmwares for the Gotek: FlashFloppy, Cortex and HxC.

It can be connected to a host through a standard 34 pin floppy ribbon cable and it's compatible with virtually any computer with a floppy disk interface (though some might require a custom ribbon cable to be made).

It can be powered by the standard 4 pin ATX floppy power connector, but also with a regular 5V DC power supply. It includes a 16x2 LCD screen display and a internal buzzer to simulate the disk activity noise.

Product info
F1 Floppy Disk Emulator. Compatible with FlashFloppy, Cortex, HxC firmwares. The unit mounts floppy disk images stored on a USB drive and it behaves like a real floppy drive. Supports a wide range of floppy image formats.

Works great with our FDC600 (MSX), our SDI1 and PlusD (ZX Spectrum)!
Attention: The Gotek clone does not includes the power supply nor the ribbon cable.

Tech specs

  • Ships with FlashFloppy firmware flashed on memory
  • 16x2 LCD Screen
  • 1x USB connector
  • 1x 34pin floppy connector
  • 1x 4pin ATX power connector
  • 1x jack DC power connector
  • Internal buzzer
  • 3 control buttons (Left, Right and Select)
  • 3D printed case

Supported Image Formats (with FlashFloppy firm)

  • ADF (Commodore Amiga)
  • ADM, ADL, ADF, DSD, SSD (Acorn DFS and ADFS)
  • ATR (Atari 8-bit)
  • D81 (Commodore 64 1581)
  • DSK (Amstrad CPC, Spectrum +3, Sam Coupe, Microbee and of course our MSX)
  • FDI, HDM (NEC PC-98)
  • IMG, IMA, DSK (IBM MFM Raw Sector)
  • JVC, DSK (Tandy Color Computer 'CoCo')
  • MBD (Spectrum MB02)
  • OPD (Spectrum Opus Discovery)
  • SDU (SAB Diskette Utility)
  • ST (Atari ST)
  • TRD (Spectrum TR-DOS)
  • V9T9, DSK (TI-99/4A)
  • VDK (Dragon)
  • HFE, HFEv3 (Universal)
  • XDF (FAT-based eXtended Disk Format, 3.5" HD 1840kB)

8bits4ever sells the F1 for €50.- plus shipping cost.

Relevant link: 8bits4ever online shop

Media browser (6)

  • F1 Floppy Disk Emulator
  • F1 Floppy Disk Emulator
  • F1 Floppy Disk Emulator
  • F1 Floppy Disk Emulator
  • F1 Floppy Disk Emulator
  • F1 Floppy Disk Emulator

Commentaires (18)

Par mohai

Paladin (838)

Portrait de mohai

16-09-2019, 18:59

The floppy connector has 34 pin, AFAIK Wink

Par Alexey

Guardian (2381)

Portrait de Alexey

16-09-2019, 19:56

I would make the case black and apply laser engraving, like I do for the RBSC stuff. I would also design the removable cover for the connectors' area. Or maybe it would be better to design this thing in the form factor of the real floppy drive. I would love to see the board...

Par LS120

Expert (95)

Portrait de LS120

16-09-2019, 23:03

it's way more expensive than gotek as well. last lot i got cost me 50 for 3 units

Par Meits

Scribe (5529)

Portrait de Meits

16-09-2019, 23:33

Sorry for my ignorance, but is this device supposed to be external? With the display on top you won't be able to read it when it's built in. Having it loose on the desk could be a tad undesired imho.

Par gdx

Prophet (3023)

Portrait de gdx

17-09-2019, 10:12

Meits wrote:

is this device supposed to be external?

Given where the screen is placed, it is necessarily external. The gotek with its LED display replaced by a small OLED screen on the front is preferable to put internally, and it's cheaper.

Par hamlet

Scribe (2526)

Portrait de hamlet

17-09-2019, 11:32

No need for another build in drive hee but I would really like to see a device like that:

A Gotek build in an FDD controller cartridge! :P

Par Argon

Paragon (1085)

Portrait de Argon

17-09-2019, 11:20

Too expensive, just build one yourself with a regular gotek. Will cost you about 25 euro all in.
Also, if they advertise these for MSX, they should at least include a floppy controller cartridge.

Par Robby

Master (169)

Portrait de Robby

17-09-2019, 12:26

Despite currently not being on stock, they additionally sell floppy disk controllers.

Par Pablibiris

Paragon (1765)

Portrait de Pablibiris

17-09-2019, 14:14

hamlet wrote:

No need for another build in drive hee but I would really like to see a device like that:

A Gotek build in an FDD controller cartridge! :P

Interesting.... :)

Par SkalTura

Master (192)

Portrait de SkalTura

18-09-2019, 12:42

I'm using this one on one of my MSX's: http://hxc2001.free.fr/floppy_drive_emulator/

Par Alexey

Guardian (2381)

Portrait de Alexey

18-09-2019, 14:46

Hamlet, I will think about the possibility of making such device. I have all necessary components - the FDC controller, Gotek device and 3D printer for doing the case. Just need a display. Any idea what display they used?

Par gdx

Prophet (3023)

Portrait de gdx

18-09-2019, 15:32

Alexey, you can use that:
https://www.ebay.com/itm/Nuovo-Amiga-Gotek-Oled-Iic-I2C-2-3c...

https://www.youtube.com/watch?v=e9bzahPvueQ

Some info here:
https://torlus.com/floppy/forum/viewtopic.php?f=33&t=3072

With this small screen you may be able to use a cartridge case of current size.

Par hamlet

Scribe (2526)

Portrait de hamlet

18-09-2019, 15:33

I will be your first customer. Great Alexey!

Par Alexey

Guardian (2381)

Portrait de Alexey

18-09-2019, 17:28

Thanks, but the display they use in F1 is not OLED, but the 2x16 character LCD with backlight. I think it's better fitting the "oldschool" device.

Par gdx

Prophet (3023)

Portrait de gdx

19-09-2019, 01:22

This LCD display with backlight is not "oldschool", it's just ugly.

If you want a display like old school, take a green LCD or VFD display.

Par Alexey

Guardian (2381)

Portrait de Alexey

20-09-2019, 11:40

I contacted 8bits4ever and got some interesting insights. I can't disclose much, but some dreams may come true.

Par hamlet

Scribe (2526)

Portrait de hamlet

20-09-2019, 14:03

Sounds gooood!

Par psi30

Supporter (2)

Portrait de psi30

05-11-2019, 08:55

Has someone added this or a gotek as a second drive to the SVI-738?

Is it just a matter of making a custom ribbon-to-DB25 cable?