Ascii 8kb mapper, confused

Par lintweaker

Champion (324)

Portrait de lintweaker

24-06-2020, 11:48

I am busy designing a new disk interface with support for a ASCII 8kb mapper so it can use Nextor.
Looking at the schematic it seems to use A12 and A11 to read the 74670 register and select the required page in ROM.
To me this not make any sense, should this not be A15 and A13?

Schematic see first page:
https://www.hvandeven.com/msx/ascii-konami-scc-mapper.pdf

EDIT: Scratch that, I was really confused, got it now! :)

!login ou Inscrivez-vous pour poster

Par Fabf

Master (249)

Portrait de Fabf

24-06-2020, 12:39

This design will not work as pages will not be in the right order.
Same issue with SCC mapper.
Only Konami mapper will work well with flashrom.
Sorry I don't know how to fix this.

Par lintweaker

Champion (324)

Portrait de lintweaker

24-06-2020, 12:56

Fabf wrote:

This design will not work as pages will not be in the right order.
Same issue with SCC mapper.
Only Konami mapper will work well with flashrom.
Sorry I don't know how to fix this.

Do you mean the design will work a read only mapper but there are issues with flashing?
Enabling flash erase/write mode will interfere with the mapper (and vice versa).

Par Fabf

Master (249)

Portrait de Fabf

24-06-2020, 16:28

You can flash and reset the computer, the ROM will start well.
But if you shut down the computer the ROM will not start.

Par gdx

Prophet (3906)

Portrait de gdx

24-06-2020, 17:20

Except if the pages are defined by software from the page 0. Nextor do it.

Par lintweaker

Champion (324)

Portrait de lintweaker

24-06-2020, 20:33

Okay, the design has a CPLD on board which can set the appropriate pages on reset. Otherwise I'll make something to be able disable the mapper function for flashing.

Par Fabf

Master (249)

Portrait de Fabf

24-06-2020, 21:25

It should works this way.