Repairing of old floppy drives

Par Alexey

Guardian (3074)

Portrait de Alexey

05-03-2021, 14:12

I have 2 old floppy drives from Sony F500 MSX2 computers with the same problem - they don't read floppies (Disk I/O Error). Both motors work fine, but the data is not read/written, as it seems. The drives are Mitsumi D357. Did anyone try to fix such drives? What is the most common problem with those drives?

I suspect that the diskette rotating motor's RPM may be low. Is there a reliable way to check the motor's RPM and trim it?

!login ou Inscrivez-vous pour poster

Par Jipe

Paragon (1461)

Portrait de Jipe

05-03-2021, 14:30

try to format a floppy with 1DD option
the upper head of this Mitsumi D357 are know for no resist at eject

Par Meits

Scribe (6355)

Portrait de Meits

05-03-2021, 14:41

This has cost me a top head back in the nineties. Disk was out, but head was still down. Inserted a new disk which forced the top head off.
It needs a bit of google translate, but this claims to prevent that to happen.
If this happened to you, the above is too late info.

Par Alexey

Guardian (3074)

Portrait de Alexey

05-03-2021, 17:59

Looks like both heads are intact. Tried formatting with 360k, but it can't finish the formatting, shows "Disk error" message. Looks like it can't read or write the boot sector.

Par Jipe

Paragon (1461)

Portrait de Jipe

05-03-2021, 18:02

can you format this floppy with another MSX ?

Par Alexey

Guardian (3074)

Portrait de Alexey

05-03-2021, 19:11

I can format the same floppy using a different floppy drive on the same MSX. The head of the non-working floppy drive is intact - I checked. So this is not an alighnment problem.