msx sunrise ide clone schematic?

ページ 2/3
1 | | 3

By popolon_

Champion (321)

popolon_ さんの画像

21-05-2020, 20:23

It seems the second gal chip is faulty. So I could program it successfully, but it has failed after that:

first the failure output was:
E:\apps>afterburner_w64.exe i -d COM19 -t GAL16V8
PES info: 5V Unknown GAL, try VPP=10..14 in 1V steps

then after some retries it went as:
E:\apps>afterburner_w64.exe i -d COM19 -t GAL16V8
PES info: 3.3V Unknown GAL, try VPP=10..14 in 1V steps

By popolon_

Champion (321)

popolon_ さんの画像

21-05-2020, 20:58

I tried with different GAL chip (GAL16V8B-25LP vs GAL16V8D-15LP) as that second gal chip, but idefload did not detect any module either. So shuold it have detected? I have checked the traces that all are connected according to that schema.
the idefload is executed using MSXDOS1 boot disk, and the util+rom is from https://www.msx.ch/ftp/Products/IDE%20Interface/ide240.lzh

By Pentarou

Champion (506)

Pentarou さんの画像

21-05-2020, 22:21

Are you sure your GAL programmer works? Why don't you put your burned GAL in a breadboard, manually toggle the inputs and check if the outputs give the expected results?
You could also program the FLASH with the bitswapped/flipped ROM, that would eliminate one variable.

By Bastion Rebel

Expert (92)

Bastion Rebel さんの画像

22-05-2020, 07:13

hello
I did 2 or 3 years ago "FUNRICE" cards based on the MSXPRO scheme, it works well for GALs, you must have a problem with your GALs
PROTO

FINAL

By popolon_

Champion (321)

popolon_ さんの画像

22-05-2020, 09:20

So GAL can be faulty, even when the data read from it is same as written to it?

By popolon_

Champion (321)

popolon_ さんの画像

22-05-2020, 11:33

@Bastion Rebel why do you have that U9 chip (SN74LS14N) mounted? In that PDF it is said that it is not mounted, so it is not needed, right?

By gdx

Enlighted (6069)

gdx さんの画像

22-05-2020, 11:56

Does the FUNRICE use the same software as the original Sunrise ATA-IDE to flash its Rom?

By Bastion Rebel

Expert (92)

Bastion Rebel さんの画像

22-05-2020, 18:04

LS14 is not mounted in final version ... (GREEN PCB V1 CARTON BOX - BLUE PCB V2 VHS BOX)

for flash FUNRICE ROM is IDEFLOAD.exe same SUNRICE files !!!
GDX i'm used too your firmware 2.50b it's working ...

for info chip very VERSATILE is LS645 and LS575 .. please attention electric static

By popolon_

Champion (321)

popolon_ さんの画像

22-05-2020, 18:22

I changed all chips, except gal chips( 16n and 25n), but it still does not work. Chips were from mouse.com, except gal chips from littlediode ebay...

By popolon_

Champion (321)

popolon_ さんの画像

22-05-2020, 18:24

Typo, meant mouser.com

ページ 2/3
1 | | 3