Hi Folks,
I''m busy with some people to get parts and estimated costs for producing the MSX-Audio extension board made by FRS.
Before I actually invest money to produce the thing I would like to know if you are interest in obtaining that board.
I'm thinking of serving you a la carte. That means the following:
1) You can buy the produced print, without any components. It's up to you to get the parts needed for this upgrade, including all the soldering.
2) You can buy the print and all the needed parts. A complete DIY set.
3) You can buy the print with all the components on it. You just have to solder the print to your Music Module yourself.
4) The most expensive option: You mail/carry your Music Module in and get it back as a fully working MSX Audio module.
Of course a combination of the above options can also be possible, depending on needs.
At the moment I'm busy with some companies to get detailed price information for the print and the needed parts. Some parts are obsolete and need to be obtained from pc computer junk.
I also need people who already made this themselves to come up with replacement parts that will also work for as much components as possible. I already read about the SD-RAM chip in earlier posts, but the more part numbers the better!
Also: if you have needed parts lying around of earlier DIY projects you won't carry out please do consider selling those / donate those to me.
Another thing to consider is this: Costs of producing the print depends on needed quality and quantity. Most of the time there are some start-up costs involved before production can start.
Let me know your thoughts and needs. And please stay on topic. I already know there are better sounding modules.
