Hi CASDuino, how are you progressing? Really curious! Will you use LVA510 on your redesign or are you considering alternative solutions (as LVA510 are not easily available).
Tbh I'm still trying and will go with LVA510 to see if it will work first and then look for an alternative if they are too difficult to get a hold of.
The European Toshiba HX-10 have been dumped, but the original Japanese model hasn't
Most of the European Spectravideo models have been dumped, but the US models still haven't
The European Sony HB-F500P have been dumped, but the Japanese HB-F500 hasn't
The Mitsubishi ML-G1 European model have been dumped, but the Japanese model hasn't
The Russian Yamaha YIS805/128 have been dumped, but not the Japanese model
Only the Yamaha CX5M & CX5MII European models have been dumped. Many other models are missing: US, Australian, etc.
Many other relevant machines are still missing:
Daewoo CPC-300
Hitachi MB-H50
Toshiba HX-23
Toshiba HX-23F
Toshiba HX-33
Toshiba HX-34
Talent DPC-300
Mitsubishi ML-G10
Mitsubishi ML-G30
Mitsubishi ML-G30mkII
Sanyo PHC-55FD2
Yamaha YIS805/256
Yamaha CX7M
Many models from the middle East
Any Sony's MSX Japanese machine is still missing or bad dumped.
*Sony
HB-11 (MSX) / Kanji Rom + Word Processor
HB-701 (MSX) / Re-dump Hit Bit software needed.
HB-701FD (MSX) / Re-dump Hit Bit software & disk rom needed.
HB-T600 (MSX2) / Re-dump RS-232C software needed (64KB), no needed to dump Kanji Rom
HB-T7 (MSX2) / Re-dump RS-232C software needed (64KB), no needed to dump Kanji Rom
HB-T7 and HB-T600 are dumped by me from original hardware.
Thanks very much!
Unfortunately I think this dump is insufficient.
The reason why, switched I/O bank address should be via 4000-5FFFh, but your dump is via 4000-7FFFh on Slot 3-1
(Program area is dumped as 32KB, working area is dumped as 32KB)
4000-5FFFh : Program area
6000-7FFF : Working area
You don't have to dump working area (6000-7FFF)
So re dump is needed as 64KB via 4000-5FFF.
I hope you to dump Slot 3-1 by correct bank S/W address (4000-5FFFh) as 64KB on T600 (Twice), T7 (once)
I think each firmware on 3-1 is different.
*If you can't fix the dump program, would you please dump 3-1 as 256KB both T600 and T7?
I can edit it.
Also would you please dump Slot 3-2 as 64KB (Plain ROM) on HB-T600 and HB-T7?
I know HB-T7 and HB-F500 have Kanji ROM (JIS 1st class).
I'm sure it is same as HB-F500 and HB-F900, but I only wonder it is same dump from EPROM.
Kanji ROM for National / Panasonic / Sony / Sanyo / Toshiba / Victor can be dumped by KANJIROM.BAS
But Kanji ROM for Yamaha will not be dumped by KANJIROM.BAS because of different I/O address.
