MSX Turbo R selecting largest mapper - Alternatives for MFR SD SCC+

By -Neo-

Champion (380)

-Neo-의 아바타

03-03-2018, 00:02

I know that I can select an external (bigger) mapper as primary/default by pressing "4" during boot when I have a MFR SD SCC+ inserted. I wonder if there are alternatives to this. Is there a DOS2 command/application to do this available or can this only be achieved when using a cartridge? If so, how is it done with the MFR SD SCC+ and would that also be possible with carts like the Carnivore 2 or GR8NET?

Login or 등록 to post comments

By Victor

Champion (469)

Victor의 아바타

03-03-2018, 00:08

-Neo- wrote:

I know that I can select an external (bigger) mapper as primary/default by pressing "4" during boot when I have a MFR SD SCC+ inserted. I wonder if there are alternatives to this. Is there a DOS2 command/application to do this available or can this only be achieved when using a cartridge? If so, how is it done with the MFR SD SCC+ and would that also be possible with carts like the Carnivore 2 or GR8NET?

That options is from NEXTOR... so you can do it with Carnivore 2, GR8NET, Rookie Drive.... any device in Nextor Mode.

By SLotman

Paragon (1215)

SLotman의 아바타

03-03-2018, 01:26

On some Panasonic machines and on turbo-R you can use memTr: https://www.msx.org/news/software/en/memtr

By -Neo-

Champion (380)

-Neo-의 아바타

03-03-2018, 15:07

That's perfect. Thanks both.